We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Bronze inline ball valve with sweat ends white handle 1-1/2 inch

Apollo

Apollo 70LF-207-01 1-1/2" Sweat Bronze Ball Valve Inline Trap

SKU CH-CPW2-NHKAJ MPN 70LF-207-01

A 1-1/2 inch sweat bronze inline ball valve trap rated for 600 psi water and 150 psi steam

  • TypeDrain Components
  • ColorWhite
  • Lead-free bronze construction meets Prop 65 compliance
  • Manual two-way operation controls air and water flow
  • 600 psi pressure rating handles demanding plumbing systems
  • 29 in Hg vacuum rating supports suction applications
  • Chrome-plated bronze ball resists corrosion for long service

Inline Trap Ball Valve

This Apollo 70LF-207-01 is a manual two-way ball valve with an inline trap design for plumbing systems. It features a bronze body and a chrome-plated bronze ball in a straight, two-piece construction. The 1-1/2 inch sweat connection joins copper pipe directly. The standard port configuration suits general flow control needs.

Installers needing sweat bronze shut-off

Suits plumbers installing water or air lines up to 600 psi operating pressure and 150 psi steam pressure. The 29 in Hg vacuum rating supports evacuation tasks. The non-locking handle allows quick manual operation. Buyers needing 3-A sanitary compliance or combustible gas ratings should look elsewhere as this valve is not rated for those services.

600 psi operating pressure limit

The maximum operating pressure of 600 psi determines if this valve withstands the system load. Steam lines must stay at or below 150 psi. Vacuum service holds to 29 in Hg. California Proposition 65 warnings apply for cancer and reproductive harm chemicals. Verify pressure and media compatibility before installation.

Highlights

  • Lead-free bronze construction meets Prop 65 compliance
  • Manual two-way operation controls air and water flow
  • 600 psi pressure rating handles demanding plumbing systems
  • 29 in Hg vacuum rating supports suction applications
  • Chrome-plated bronze ball resists corrosion for long service

Specifications

TypeDrain Components
ColorWhite
BrandApollo
Model70LF-207-01

Questions about this item

What pipe size does the 1-1/2" sweat connection on this Apollo 70LF-207-01 valve require?

The sweat ends are sized for 1-1/2 inch copper tube; clean and flux both the tube and valve sockets before soldering to ensure a leak-free joint.

Which way should the handle face during installation so the ball seats correctly?

The valve is a straight two-piece bronze body with a standard-port chrome-plated bronze ball; orientation does not affect sealing, but leave the handle accessible for operation.

How often should the PTFE seats be inspected given the 600 psi pressure rating?

Inspect seats annually or after any pressure surge; the non-locking handle allows quick cycling to verify smooth operation and detect seat wear early.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.