We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Bronze inline ball valve trap with sweat connections

Apollo

Apollo 70LF-202-01 3/8 in Bronze Ball Valve Trap

SKU CH-D3N9-TRTZ2 MPN 70LF-202-01

A 3/8 in bronze ball valve inline trap rated for 600 psi water and 150 psi steam service

  • TypeDrain Components
  • Lead-free bronze construction meets Prop 65 compliance
  • 600 psi operating pressure handles demanding water lines
  • 150 psi steam rating supports heating applications
  • 29 in Hg vacuum rating ensures reliable sealing
  • Standard port two-piece design simplifies maintenance

Bronze Ball Valve Trap — 3/8 in Sweat

The Apollo 70LF-202-01 is a straight-pattern, two-piece bronze ball valve with sweat ends for 3/8 inch copper tube. It uses a chrome-plated bronze ball and a non-locking handle for manual two-way flow control. Rated for 600 psi water, oil or air and 150 psi saturated steam, it also holds a 29 in Hg vacuum. Lead-free construction meets California Proposition 65 disclosure requirements.

Suitable for residential

Installers who need a compact shut-off on 3/8 inch copper lines for water, air or low-pressure steam will find this valve fits the job. It is not for systems that require a locking handle, three-way diversion or a full-port flow path. Builders needing combustible-gas approval or 3-A sanitary compliance must select a different component.

Maximum working pressure 600 psi water/air

The 600 psi cold-water rating is the primary figure that determines whether the valve matches the system design pressure. Steam service is limited to 150 psi, and vacuum duty stops at 29 in Hg. Verify the design pressure against these limits before specifying the part.

Highlights

  • Lead-free bronze construction meets Prop 65 compliance
  • 600 psi operating pressure handles demanding water lines
  • 150 psi steam rating supports heating applications
  • 29 in Hg vacuum rating ensures reliable sealing
  • Standard port two-piece design simplifies maintenance

Specifications

TypeDrain Components
BrandApollo
Model70LF-202-01

Questions about this item

Does the chrome-plated bronze ball or the bronze body need periodic replacement under normal water service?

The chrome-plated bronze ball and bronze body are designed for continuous service with air or water; no scheduled replacement interval is required for these components.

Will the 600 psi pressure rating or the 150 psi steam limit be reached first in a hot-water recirculation loop?

The 150 psi steam rating is the lower limit, so sustained high-temperature water will hit that ceiling before the 600 psi cold-water rating.

How much heat does the valve body radiate when it stays open all day in a 3/8 in line?

The bronze body conducts heat from the fluid but has no internal heat source; surface temperature will match the media temperature in the line.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.