We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Bronze inline ball valve with lever handle, female and male threaded ends

Apollo

Apollo 7080501 1" FNPT x MNPT Bronze Ball Valve

SKU CH-CTJF-43HG2

Inline bronze ball valve with FNPT x MNPT connections rated for 600 psi CWP and 150 psi WSP up to 450 °F

  • TypeOther
  • Standard-port flow control with 600 psi CWP rating
  • Blowout-proof stem prevents stem ejection under pressure
  • Bronze body rated from -20 °F to 450 °F
  • Chrome-plated brass ball with RPTFE seats for tight shut-off
  • FNPT × MNPT inline connections for direct pipe threading

Bronze Ball Valve 1" FNPT x MNPT

The Apollo 7080501 is a 2-piece inline bronze ball valve with a 1-inch FNPT by MNPT connection. It suits plumbing installers and maintenance crews needing a standard-port shut-off for water, oil or gas lines. The blowout-proof brass stem and chrome-plated brass ball are built for commercial and industrial piping systems. This valve is not for buyers who need a full-port design or a different end connection.

Pressure and Temperature Limits

Rated at 600 psi CWP and 150 psi WSP, the valve handles working pressures up to 600 psi and steam pressures up to 150 psi. Its temperature range spans -20 to 450 degrees F, allowing use in chilled water and low-pressure steam circuits. The PTFE body seal and RPTFE seats maintain sealing integrity across that span. The lever handle is zinc-plated steel for corrosion resistance.

Prop 65 Compliance Notice

California Proposition 65 warnings apply because the valve contains a chemical known to the state to cause cancer and birth defects or other reproductive harm. No additional accessories, software or installation hardware are bundled with the valve. Installers must supply their own pipe sealant or thread tape and verify local code requirements before use. The restriction list for sale in specific states is currently empty.

Highlights

  • Standard-port flow control with 600 psi CWP rating
  • Blowout-proof stem prevents stem ejection under pressure
  • Bronze body rated from -20 °F to 450 °F
  • Chrome-plated brass ball with RPTFE seats for tight shut-off
  • FNPT × MNPT inline connections for direct pipe threading

Specifications

BrandAPOLLO
TypeOther

Questions about this item

How do I install the 1" FNPT x MNPT inline valve and what step is often missed?

Apply PTFE tape or pipe sealant to the male NPT threads, thread the valve onto the pipe, and tighten with a wrench on the valve body flats — not the handle — to avoid distorting the bronze body.

What maintenance or replacement will the 1" bronze ball valve need over time?

The RPTFE seats and PTFE body seal may wear after many cycles; if leakage appears, replace the valve because the 2-piece bronze body is not designed for field seat replacement.

What limit appears first when the 1" Apollo 7080501 runs at sustained high temperature?

The 150 psi WSP steam rating is reached before the 600 psi CWP water rating, so steam service above 150 psi will exceed the valve’s rated limit first.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.