Advance Tabco
Advance Tabco FC-1-1818-X Wall Mounted Sink 18 in x 18 in, 304
- Silver
$790.99
0.00938861BTC
In stock
Apollo
Apollo 7014264 3/8" FNPT Bronze Ball Valve
3/8" FNPT bronze ball valve rated 600 psi CWP with 316 stainless steel ball and stem, blowout-proof stem, MPTFE seats, and -20 °F to 450 °F temperature range
- TypeOther
- Rated for 600 psi cold-working pressure in bronze body
- Withstands 250 psi steam service up to 450 °F
- Blowout-proof 316 stainless stem prevents stem ejection
- MPTFE seats and PTFE body seals resist corrosion
- Lever handle on zinc-plated steel gives quick manual control
Apollo 7014264 Bronze Ball Valve
The Apollo 7014264 is a 3/8 inch FNPT inline ball valve built for plumbing and hydronic systems. Its bronze B584 body and 316 stainless steel ball suit residential and light-commercial water, oil or gas lines. Installers choose it when a compact, quarter-turn shut-off is required.
Standard Port 600 PSI Rating
The standard-port design carries a 600 psi cold working pressure and 250 psi steam rating across a -20 to 450 degrees F range. MPTFE seats and PTFE body seals maintain sealing integrity at the published limits. This pressure envelope is the single figure that determines whether the valve fits the system design.
Blowout-Proof Stem Lever Handle
A blowout-proof 316 stainless steel stem and zinc-plated steel lever handle allow tool-free operation after the valve is threaded into place. The two-piece body simplifies thread engagement but requires proper pipe dope or tape on FNPT connections to prevent leaks. Over-tightening the bronze body can distort the seat seal.
Highlights
- Rated for 600 psi cold-working pressure in bronze body
- Withstands 250 psi steam service up to 450 °F
- Blowout-proof 316 stainless stem prevents stem ejection
- MPTFE seats and PTFE body seals resist corrosion
- Lever handle on zinc-plated steel gives quick manual control
Specifications
| Brand | APOLLO |
|---|---|
| Type | Other |
Questions about this item
What does the 600 psi CWP rating mean when the valve is installed in a plumbing system?
It indicates the maximum cold working pressure of 600 psi the valve can handle at ambient temperature, which decreases as fluid temperature rises toward the 450°F limit.
How does the FNPT x FNPT connection type affect what piping can be used with this valve?
Both ends have female National Pipe Taper threads, so the valve accepts 3/8-inch male NPT pipe nipples or fittings directly without adapters.
What clearance is needed to install this inline bronze ball valve in a tight space?
The 2-piece inline body with a lever handle requires enough straight pipe run for the 3/8-inch FNPT connections plus handle swing radius for quarter-turn operation.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
