We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Bronze inline ball valve with stainless lever handle

Apollo

Apollo 7010210 3/8" FNPT Bronze Ball Valve Inline bathware

SKU CH-1APF-AQNZW

Controls water flow with a bronze inline ball valve rated for 600 psi CWP and 150 psi WSP from -20 to 450 degrees F

  • TypeOther
  • Inline bronze ball valve with 600 psi CWP rating
  • Blowout-proof brass stem prevents stem ejection
  • 316 stainless steel lever handle resists corrosion
  • RPTFE seats and PTFE body seals handle -20 to 450 °F
  • FNPT x FNPT connections for direct pipe threading

Apollo 7010210 Bronze Ball Valve

The Apollo 7010210 is a 3/8 inch FNPT inline bronze ball valve designed for residential or light commercial plumbing. It suits installers who need a standard port valve with a blowout-proof stem for water, oil or gas lines. The two-piece body uses chrome-plated bronze ball and RPTFE seats for reliable shut-off. Buyers who need a full-port design or larger pipe sizes should select a different model.

Pressure and Temperature Limits

This valve handles a maximum of 600 psi cold working pressure and 150 psi working steam pressure. The operating temperature ranges from -20 to 450 degrees F, with PTFE body seals and RPTFE seats maintaining integrity across that span. Systems exceeding either pressure rating or the upper temperature limit require a higher-rated valve. The FNPT threads conform to standard NPT dimensions for 3/8 inch pipe.

Installation Notes

The lever handle is made from 316 stainless steel and operates on a brass stem with a blowout-proof design. Apply thread sealant to the FNPT connections and tighten using a wrench on the valve body flats, not the handle. Over-tightening can distort the bronze body or damage the PTFE seals. Ensure the pipe is clean and aligned to prevent stress on the joints after installation.

Highlights

  • Inline bronze ball valve with 600 psi CWP rating
  • Blowout-proof brass stem prevents stem ejection
  • 316 stainless steel lever handle resists corrosion
  • RPTFE seats and PTFE body seals handle -20 to 450 °F
  • FNPT x FNPT connections for direct pipe threading

Specifications

BrandAPOLLO
TypeOther

Questions about this item

Should I choose the standard-port version or look for a full-port option?

This valve has a standard port, so the flow passage is slightly smaller than the pipe bore; select it when a modest pressure drop is acceptable and space is limited.

What does the 600 psi CWP rating mean once the valve is installed in my plumbing?

It guarantees the valve body will hold 600 psi cold water pressure continuously at room temperature; actual system pressure must stay below that limit.

How does the FNPT x FNPT connection affect what pipe I can use?

Both ends have female National Pipe Taper threads, so you thread male NPT nipples or adapters directly into each side for a sealed joint.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.