Advance Tabco
Advance Tabco FC-1-1818-X Wall Mounted Sink 18 in x 18 in, 304
- Silver
$790.99
0.00925654BTC
In stock
Apollo
Apollo 701012741 1/4" FNPT Bronze Ball Valve bathware
A 1/4-inch FNPT bronze ball valve rated for 125 psi CWP and temperatures from -20 to 450 degrees Fahrenheit
- TypeOther
- Handles up to 125 psi CWP for reliable shut-off
- Operates from -20 °F to 450 °F across demanding systems
- Blow-out-proof 316 stainless steel stem prevents stem ejection
- Locking lever handle with vinyl grip secures valve position
- Bronze body with chrome-plated brass ball resists corrosion
Apollo 701012741 1/4" FNPT Bronze Ball Valve
This inline bronze ball valve is designed for residential and light commercial plumbing systems requiring reliable shut-off control. It suits installers needing a standard-port valve with female NPT threads on both ends for direct pipe connection.
Capacity and pressure limits
The valve handles a maximum working pressure of 125 psi CWP across a temperature range from -20 to 450 degrees Fahrenheit. Its standard port provides sufficient flow for typical 1/4-inch supply lines while the blowout-proof stem adds a safety margin against stem ejection under pressure.
Locking lever and material benefits
A zinc-plated steel locking lever with vinyl grip allows the handle to be secured in open or closed positions, preventing accidental operation. Chrome-plated brass ball and RPTFE seats resist corrosion and ensure smooth sealing, while PTFE body seals and a 316 stainless steel stem extend service life in aggressive water conditions.
Highlights
- Handles up to 125 psi CWP for reliable shut-off
- Operates from -20 °F to 450 °F across demanding systems
- Blow-out-proof 316 stainless steel stem prevents stem ejection
- Locking lever handle with vinyl grip secures valve position
- Bronze body with chrome-plated brass ball resists corrosion
Specifications
| Brand | APOLLO |
|---|---|
| Type | Other |
Questions about this item
Will the 1/4" FNPT threads on this Apollo 701012741 valve match the 1/4" FNPT fittings on my existing bronze piping?
Yes, both ends use 1/4 inch FNPT threads, so they will thread directly onto matching male NPT fittings on your current piping.
How can I verify the valve is operating correctly after installation?
Turn the locking lever handle a full quarter turn; the ball should rotate smoothly from fully open to fully closed with no binding, and the vinyl grip should stay secure.
Does the box include any pipe thread sealant or extra fittings, or must I purchase those separately?
Only the valve body with its locking lever handle is supplied; thread sealant, tape, and any connecting nipples or adapters must be bought separately.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
