Advance Tabco
Advance Tabco FC-1-1818-X Wall Mounted Sink 18 in x 18 in, 304
- Silver
$790.99
0.00938114BTC
In stock
Apollo
Apollo 70-106-41 Bronze Ball Valve 1-1/4" FNPT Inline
1-1/4" FNPT inline bronze ball valve rated to 125 psi CWP and -20 to 450 °F
- TypeOther
- Bronze construction resists corrosion in plumbing systems
- Inline 2-piece design allows straightforward pipe installation
- Blowout-proof stem prevents dangerous pressure failures
- Lever handle with vinyl grip enables easy manual operation
- Rated for 125 psi CWP and temperatures up to 450 Degrees F
1-1/4" Bronze Ball Valve
The Apollo 70-106-41 is a two-piece inline ball valve with FNPT connections designed for plumbing systems requiring reliable shut-off. It suits installers needing a standard-port valve rated for 125 psi cold working pressure in water, oil, or gas lines.
Standard port capacity and pressure headroom
The standard port provides full flow for 1-1/4 inch piping while maintaining a compact body suitable for tight installations. It handles continuous pressures up to 125 psi CWP and temperatures from -20 to 450 degrees F, but the reduced bore creates a restriction unsuitable for pigging or full-bore flow requirements.
FNPT threaded interface limits
The female National Pipe Taper threads seal with tape or compound and require proper engagement to prevent leaks at the 125 psi rating. Brass stems and PTFE body seals resist corrosion within the stated temperature range, yet the zinc-plated steel handle may corrode in highly caustic environments not covered by the bronze body rating.
Highlights
- Bronze construction resists corrosion in plumbing systems
- Inline 2-piece design allows straightforward pipe installation
- Blowout-proof stem prevents dangerous pressure failures
- Lever handle with vinyl grip enables easy manual operation
- Rated for 125 psi CWP and temperatures up to 450 Degrees F
Specifications
| Brand | APOLLO |
|---|---|
| Type | Other |
Questions about this item
Will this 1-1/4" FNPT bronze ball valve connect to my existing threaded copper or steel piping without special fittings?
The valve uses FNPT x FNPT threads, so it joins directly to any matching male NPT pipe or nipple of the same nominal size. No proprietary adapters are required.
How can I verify the valve is sealing correctly after installation?
Pressurise the line up to the 125 psi CWP rating and check the PTFE body seal and RPTFE seats for leaks. The blowout-proof brass stem and lever handle should operate smoothly through the full quarter turn.
What comes in the box and what must I supply separately?
The package contains the 2-piece bronze ball valve with chrome-plated brass ball, zinc-plated steel lever handle with vinyl grip, and PTFE body seal. Pipe thread sealant or tape and the mating male NPT pipe ends are not included.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
