We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Bronze inline ball valve with lever handle

Apollo

Apollo 70-102-41 3/8" FNPT Bronze Ball Valve Inline bathware

SKU CH-WAR8-QAE2P

A bronze inline ball valve with FNPT connections rated to 125 psi and a temperature range of -20 to 450 degrees Fahrenheit

  • TypeOther
  • Bronze body resists corrosion in water systems
  • Standard port maintains full 3/8-inch flow capacity
  • Blowout-proof stem prevents internal pressure failure
  • RPTFE seats seal reliably from -20 to 450 °F
  • Lever handle with vinyl grip allows quick manual operation

Apollo 3/8" Bronze Ball Valve

The Apollo 70-102-41 is a 3/8 inch FNPT inline bronze ball valve designed for plumbing systems requiring reliable shut-off. Its standard port configuration and blowout-proof stem suit residential and light commercial water or air lines. The chrome-plated brass ball and RPTFE seats provide corrosion resistance across a broad temperature range. This new valve carries California Proposition 65 warnings for chemicals known to cause cancer and reproductive harm.

Verify Thread Size And Pressure Rating

Confirm your piping uses 3/8 inch FNPT threads to match the valve's female connections on both ends. The 125 psi CWP maximum pressure rating must exceed your system's operating pressure including any water hammer spikes. Ensure the -20 to 450 degrees F temperature range covers the media you will control. The vinyl-grip lever handle requires enough clearance to rotate fully without obstruction from adjacent fittings or walls.

Replaces Worn Gate Or Globe Valves

This ball valve replaces older gate or globe valves where quarter-turn operation and tighter sealing are preferred. The upgrade is worth it when a leaking packing gland or seized stem makes the old valve unreliable. Two-piece bronze construction allows inline servicing without cutting pipe if the union nuts are accessible. Buyers needing a full-port design for pigging or minimum flow restriction should look elsewhere.

Highlights

  • Bronze body resists corrosion in water systems
  • Standard port maintains full 3/8-inch flow capacity
  • Blowout-proof stem prevents internal pressure failure
  • RPTFE seats seal reliably from -20 to 450 °F
  • Lever handle with vinyl grip allows quick manual operation

Specifications

BrandAPOLLO
TypeOther

Questions about this item

Does the Apollo 70-102-41 valve come with any installation fittings or pipe sealant in the box?

The valve is supplied as a single unit with a lever handle already fitted; pipe fittings, thread sealant or tape must be purchased separately.

How do I decide between the standard-port 3/8" FNPT version and any other port or connection options?

This model is a standard-port bronze ball valve with 3/8" FNPT x FNPT ends rated to 125 psi CWP; choose it when those exact pipe size, connection type and pressure rating match your system.

What does the 125 psi CWP rating mean when the valve is installed in a hot-water line?

The 125 psi cold working pressure applies at lower temperatures; at the maximum 450 °F service temperature the allowable pressure will be lower, so verify your system pressure against the valve's pressure-temperature curve.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.