We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Bronze swing check valve, press connections, inline body

Apollo

Apollo 61YLF205T1PR 1 in Press Bronze Swing Check Valve

SKU CH-1Z96-K0A4N MPN 61YLF205T1PR

A lead-free bronze swing check valve with press connections for 1-inch pipe, rated to 200 psi water pressure and 180 °F maximum temperature

  • TypeDrain Components
  • Lead-free bronze construction ensures safe potable water use
  • Press-to-press connection enables fast, solder-free installation
  • Swing-check design allows 28.6 gpm flow with minimal pressure drop
  • Rated for 200 psi water and 15 psi steam at 180 °F
  • Operates vertically or horizontally with .5 psi cracking pressure

1 in Press Bronze Swing Check Valve

The Apollo 61YLF205T1PR is a lead free bronze swing check valve sized for 1 in press connections. It suits general purpose water and low pressure steam lines in residential and commercial plumbing systems.

Sustained Flow and Pressure Handling

The valve handles a maximum water pressure of 200 psi and a maximum steam pressure of 15 psi WSP. Operating temperatures range from 33 Degrees F to 180 Degrees F with a rated flow of 28.6 gpm and a low cracking pressure of .5 psi.

Press Connection Installation

Press x Press ends join copper tube without soldering using a compatible press tool and jaw. Horizontal or vertical mounting is approved. The EPDM seal and RPTFE seat resist common water additives, though the product carries California Proposition 65 warnings for cancer and reproductive harm.

Highlights

  • Lead-free bronze construction ensures safe potable water use
  • Press-to-press connection enables fast, solder-free installation
  • Swing-check design allows 28.6 gpm flow with minimal pressure drop
  • Rated for 200 psi water and 15 psi steam at 180 °F
  • Operates vertically or horizontally with .5 psi cracking pressure

Specifications

TypeDrain Components
BrandApollo
Model61YLF205T1PR

Questions about this item

Does the 0.5 psi cracking pressure keep the valve quiet when water runs all day?

The low 0.5 psi cracking pressure lets the disc open with minimal flow surge, reducing water hammer noise during continuous operation.

What piping must already be in place for the 1 in press connections to work?

You need 1 in copper tube prepared for press fittings and a compatible press tool with the correct jaw size.

Will the 180 °F temperature limit and RPTFE seat hold up on an older boiler loop that spikes above that?

The valve is rated to 180 °F max; sustained temperatures above that can degrade the RPTFE seat and EPDM seal.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.