Advance Tabco
Advance Tabco FC-1-1818-X Wall Mounted Sink 18 in x 18 in, 304
- Silver
$790.99
0.0093737BTC
In stock
Apollo
Apollo 60B20124 Angle Globe Valve 1/4 FNPT Carbon Steel bathware
A 1/4-inch FNPT carbon-steel angle globe valve rated for 10,000 psi fluid pressure and 600-degree Fahrenheit air service
- TypeOther
- Controls air, fluid and gas up to 10,000 psi
- Carbon steel body handles 600 °F air at 10,000 psig
- Angle globe design fits tight piping runs
- Rising stem with cross handle shows valve position
- 1/4 inch FNPT connections for standard pipe threads
Product identity
The Apollo 60B20124 is an angle globe valve built for residential and light commercial plumbing systems. It controls the flow of air, fluid or gas through a quarter-inch FNPT connection.
Critical specification
The valve body is carbon steel with a rising stem and cross handle, rated for 10,000 psi fluid pressure and 10,000 psig air pressure at 600 Degrees F. Maximum fluid temperature is 100 Degrees F and steam service is not rated.
Sustained operation
Under continuous pressure the carbon steel body maintains its seal up to the published pressure limits. The rising stem design allows visual confirmation of valve position during extended duty cycles.
Highlights
- Controls air, fluid and gas up to 10,000 psi
- Carbon steel body handles 600 °F air at 10,000 psig
- Angle globe design fits tight piping runs
- Rising stem with cross handle shows valve position
- 1/4 inch FNPT connections for standard pipe threads
Specifications
| Brand | APOLLO |
|---|---|
| Type | Other |
Questions about this item
What does the 10,000 psi fluid-pressure rating mean when the valve is installed in a real system?
It indicates the maximum fluid pressure the carbon-steel body can contain at room temperature; actual working pressure must be derated as temperature rises.
How does the FNPT connection limit what pipe or fittings can be used?
The 1/4-inch female NPT threads accept only matching male NPT pipe or adapters; other thread forms will not seal.
What clearance is needed to fit the 3 13/32-inch handle height and 2 1/4-inch inlet-to-outlet length?
Allow at least 3 13/32 inches above the inlet centreline for the cross handle and 2 1/4 inches along the pipe run for the angle body.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
