Advance Tabco
Advance Tabco FC-1-1818-X Wall Mounted Sink 18 in x 18 in, 304
- Silver
$790.99
0.00950378BTC
In stock
Apollo
Apollo 60A70201 Globe Valve 3/8 in FNPT 316 SS 5000 psi
3/8-inch FNPT globe valve in 316 stainless steel rated for 5000 psi air, fluid and gas service up to 100 degrees F
- TypeOther
- 316 stainless steel body resists corrosion
- Rated to 5000 psi for high-pressure systems
- FNPT x FNPT connections simplify piping
- Rising stem with cross handle eases operation
- Suitable for air, fluid and gas media
Apollo 3/8 in Globe Valve
The Apollo 60A70201 is a 3/8 inch globe valve built from 316 stainless steel for air, fluid and gas service. It uses FNPT x FNPT connections in a tee body with a rising stem and cross handle. The design suits industrial and commercial piping where corrosion resistance and positive shut-off are required.
5000 psi pressure rating and 100 °F limit
Rated for 5000 psig at 100 degrees F, the valve handles high-pressure air, gas and fluid lines within that temperature ceiling. Steam service is not rated, so the unit should not be used in steam applications. The 2 1/4 inch inlet-to-outlet length and 3 13/32 inch handle height define the installed envelope.
Replaces lower-pressure or carbon-steel valves
The step to 316 stainless steel and 5000 psi capacity is justified when the media is corrosive or the system pressure exceeds the limits of bronze or carbon-steel globe valves. It is not suited for steam systems, for larger pipe sizes, or for installations that demand a quarter-turn ball valve instead of a multi-turn globe action.
Highlights
- 316 stainless steel body resists corrosion
- Rated to 5000 psi for high-pressure systems
- FNPT x FNPT connections simplify piping
- Rising stem with cross handle eases operation
- Suitable for air, fluid and gas media
Specifications
| Brand | APOLLO |
|---|---|
| Type | Other |
Questions about this item
Will the 3/8 in FNPT connections on this Apollo globe valve thread directly onto my existing 3/8 in NPT piping?
Yes, the valve uses FNPT x FNPT connections sized at 3/8 in, so it will thread onto standard 3/8 in male NPT pipe ends without adapters.
How can I confirm the rising-stem mechanism is operating correctly after installation?
Turn the cross handle and watch the stem rise and lower visibly; smooth travel and a firm stop at each end indicate the 316 stainless steel stem is seating properly.
Does the package include any pipe sealant or thread tape for the FNPT connections?
The valve ships as the globe valve body only; you will need to supply PTFE tape or pipe dope rated for 5000 psi service to seal the 3/8 in FNPT threads.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
