Apollo
Apollo 59LF008P2 Y Strainer 2" FNPT Lead Free Bronze 400 CWP
Lead-free bronze Y strainer with 304 stainless-steel screen rated 400 CWP and 840-micron filtration for 2-inch FNPT water lines
- Lead-free bronze housing meets potable-water standards
- 400 CWP rating handles high-pressure plumbing systems
- 304 stainless steel screen traps debris at 840 micron
- 1-1/4" blow-off port simplifies cleaning without disassembly
- NPT female threads fit standard 2" piping directly
Apollo 59LF008P2 Y Strainer
The Apollo 59LF008P2 is a lead-free bronze Y strainer with female NPT connections on both ports. It is rated for 400 CWP and 125 SWP with a maximum pressure of 400 psi at 100 degrees F. The unit includes a 304 stainless steel perforated screen with a 0.0469 in mesh and 840 micron rating.
Suited for potable water systems needing debris
This strainer fits residential or commercial plumbing where lead-free bronze is required by code. The 2 in female NPT ports match standard pipe threads for straightforward installation. It is not intended for steam service above 125 psi or for applications needing a finer mesh than 840 micron.
Handles 400 psi at 100 degrees F
The bronze body and Class 400 rating provide headroom for typical cold water pressure surges. The 6 5/8 in length and 6 in height allow inline mounting without excessive space. The 1 1/4 in blow-off port enables screen cleaning without removing the strainer from the line.
Highlights
- Lead-free bronze housing meets potable-water standards
- 400 CWP rating handles high-pressure plumbing systems
- 304 stainless steel screen traps debris at 840 micron
- 1-1/4" blow-off port simplifies cleaning without disassembly
- NPT female threads fit standard 2" piping directly
Specifications
| Brand | APOLLO |
|---|
Questions about this item
What size NPT piping must I already have to install this 2 in FNPT Y strainer?
You need 2 in NPT male threads on both sides of the line so the strainer’s female ports thread on directly.
Will the 400 psi CWP rating handle the same pressure as my existing 125 SWP bronze valves?
The strainer is rated 400 psi CWP at 100 °F and 125 SWP at 150 °F, matching the steam-pressure class of those valves.
How can I confirm the 840 micron screen is filtering correctly after installation?
Open the 1 1/4 in blow-off port briefly; a steady discharge of captured debris shows the 0.0469 in perforated 304 stainless screen is trapping particles as designed.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Taylor 70204 Acrylic Coated Polyester Gray Hot Shot BoatGuard Boat Cover
- Transparent
BoatBuckle F12071 Kwik-Lok Gunwale Tie-Down Stainless Steel
- Transparent



