Apollo
Apollo 59LF003P2PR Y Strainer 1/2" Press Lead Free Bronze 250 psi accessory
A lead-free bronze Y strainer with a 302 stainless-steel screen filters water at up to 250 psi and 250 °F
- Lead-free bronze housing meets safe-water standards
- 250 psi at 250 °F handles high-pressure hot lines
- 302 stainless screen with 297 micron rating traps fine debris
- 1/2" press connection installs without solder or thread sealant
- 5 gpm Cv factor maintains strong flow through the strainer
1/2" Lead-Free Bronze Y Strainer
The Apollo 59LF003P2PR is a press-fit Y strainer built for 1/2 inch piping in potable-water systems. Lead-free bronze housing meets strict drinking-water standards and handles pressures up to 250 psi at 100 degrees Fahrenheit. It suits residential and light-commercial plumbing where debris protection is required.
Integrated 302 Stainless Screen
A 302 stainless-steel screen with 0.0313 inch perforations and a 297 micron rating ships installed, catching sediment before it reaches downstream valves. The 1/4 inch blow-off port allows quick cleaning without removing the body from the line. No separate screen purchase or assembly is needed.
5 GPM Flow Capacity
The strainer carries a Cv flow factor of 5 gallons per minute, adequate for typical fixture branches and small appliance feeds. At 300 psi maximum pressure and 250 degrees Fahrenheit maximum temperature it covers standard hot and cold distribution. It will not serve high-demand mains or process lines needing greater flow.
Highlights
- Lead-free bronze housing meets safe-water standards
- 250 psi at 250 °F handles high-pressure hot lines
- 302 stainless screen with 297 micron rating traps fine debris
- 1/2" press connection installs without solder or thread sealant
- 5 gpm Cv factor maintains strong flow through the strainer
Specifications
| Brand | APOLLO |
|---|
Questions about this item
How often will the 302 stainless steel screen with 0.0313 in mesh need cleaning or replacement?
Clean the screen when flow drops below the 5 gpm Cv rating; the stainless mesh resists corrosion so replacement is only needed if perforations tear or deform.
What pressure limit appears first during continuous operation at 250 °F?
The 250 psi rating at 250 °F governs sustained use; the 300 psi maximum applies only at lower temperatures.
How much heat does the bronze body radiate when water runs at 250 °F all day?
Bronze conducts heat efficiently, so the housing will reach near fluid temperature; insulate the 4 3/4 in body to protect nearby components and personnel.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
