We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Bronze vacuum breaker with FNPT threads, 4 3/8 in tall, 3 3/4 in wide

Apollo

Apollo 38LF10601 Vacuum Breaker 1-1/4 In FNPT 125 psi

SKU CH-6KFM-YHJK7

Lead-free bronze vacuum breaker with silicone seal rated to 125 psi and 140 °F, meeting ASSE 1001-2008 and NSF/ANSI 372 standards

  • TypePipes, Valves & Fittings
  • Lead-free bronze construction meets NSF/ANSI 372 standards
  • ASSE 1001-2008 certified vacuum breaker prevents backflow contamination
  • 125 psi maximum pressure rating handles demanding plumbing systems
  • 140 Degrees F temperature range suits hot water applications
  • 1-1/4 inch FNPT connection fits standard piping configurations

Apollo 38LF10601 Vacuum Breaker

The Apollo 38LF10601 is a lead-free bronze vacuum breaker designed for potable water systems. It protects residential and commercial plumbing from backsiphonage contamination. The unit carries ASSE 1001-2008 certification and meets NSF/ANSI 372 low-lead requirements.

FNPT connection installs in minutes

The 1-1/4 inch FNPT threads connect directly to female pipe fittings without special tools. Silicone seals resist degradation from chlorinated water. Installers should verify thread condition and avoid over-tightening, which can crack the bronze body.

Rated for 125 psi and 140 Degrees F

The breaker handles continuous pressure up to 125 psi and water temperatures to 140 Degrees F. It suits standard municipal supply conditions. Systems exceeding these limits or requiring atmospheric venting beyond the device capacity need alternative protection.

Highlights

  • Lead-free bronze construction meets NSF/ANSI 372 standards
  • ASSE 1001-2008 certified vacuum breaker prevents backflow contamination
  • 125 psi maximum pressure rating handles demanding plumbing systems
  • 140 Degrees F temperature range suits hot water applications
  • 1-1/4 inch FNPT connection fits standard piping configurations

Specifications

BrandAPOLLO VALVES
TypePipes, Valves & Fittings

Questions about this item

How can I confirm the vacuum breaker is functioning correctly after installation?

Observe that water does not backflow into the supply line when the faucet is shut off and that no water leaks from the air inlet at 125 psi working pressure.

What components are included and what must be purchased separately for the Apollo 38LF10601?

The box contains the vacuum breaker assembly with lead-free bronze body and silicone seal; piping, thread sealant and any required adapters are not included.

Which version of this vacuum breaker should I select for a 1-1/4 inch FNPT connection?

The 38LF10601 model is built specifically for 1-1/4 inch FNPT threads, rated to 125 psi and 140 °F, and meets ASSE 1001-2008 and NSF/ANSI 372 standards.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.