Advance Tabco
Advance Tabco FC-1-1818-X Wall Mounted Sink 18 in x 18 in, 304
- Silver
$790.99
0.00948634BTC
In stock
Apollo
Apollo 38LF10101 Vacuum Breaker 1/4 in FNPT 125 psi
A lead-free bronze vacuum breaker with 1/4 in FNPT connection rated to 125 psi and 212 °F
- TypePipes, Valves & Fittings
- Lead-free bronze construction meets NSF/ANSI 372 standards
- Silicone seal rated to 212 °F for hot-water service
- 125 psi pressure rating protects downstream plumbing
- ASSE 1001-2008 certified anti-siphon performance
- Compact 1/4 in FNPT fitting installs in tight spaces
Apollo 38LF10101 Vacuum Breaker
This lead-free bronze vacuum breaker installs on a 1/4 in FNPT connection to prevent back-siphonage in residential and light-commercial plumbing systems. It meets ASSE 1001-2008 and NSF/ANSI 372 standards for potable-water safety.
Verify thread size and pressure rating
Confirm the existing piping uses 1/4 in FNPT threads and that system pressure does not exceed 125 psi. The silicone seal operates up to 212 Degrees F, so ensure the fluid temperature stays within that range.
Sustained pressure and temperature performance
Under continuous 125 psi pressure the lead-free bronze body and silicone seal maintain a reliable seal without degradation. The ASSE 1001-2008 compliance confirms consistent backflow prevention during prolonged high-temperature service.
Highlights
- Lead-free bronze construction meets NSF/ANSI 372 standards
- Silicone seal rated to 212 °F for hot-water service
- 125 psi pressure rating protects downstream plumbing
- ASSE 1001-2008 certified anti-siphon performance
- Compact 1/4 in FNPT fitting installs in tight spaces
Specifications
| Brand | APOLLO VALVES |
|---|---|
| Type | Pipes, Valves & Fittings |
Questions about this item
Does the Apollo 38LF10101 vacuum breaker include any extra fittings or must I buy pipe tape separately?
The unit ships as a single 1/4 in FNPT vacuum breaker; pipe tape or sealant for the threaded connection is not included and must be purchased separately.
Which pressure rating should I select if my system runs at 125 psi?
This model is rated for a maximum of 125 psi, matching your system pressure exactly.
What does the 125 psi rating mean when the valve is installed in a hot-water line?
It indicates the maximum working pressure the lead-free bronze body and silicone seal can withstand at temperatures up to 212 °F while meeting ASSE 1001-2008 and NSF/ANSI 372 standards.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
