Apollo
Apollo 3810201 Vacuum Breaker 3/8 in FNPT Bronze 125 psi bathware
Bronze vacuum breaker with 3/8 in FNPT connection rated for 125 psi and 212 °F
- Size3/8"
- TypeOther
- Prevents backflow with 125 psi bronze construction
- Withstands 212 °F for hot-water installations
- Compact 2 3/8 in height fits tight spaces
- Meets BABA and Buy American Act requirements
- 3/8 in FNPT connection for standard plumbing fit
Apollo 3810201 Vacuum Breaker 3/8 in FNPT Bronze
The Apollo 3810201 is a bronze vacuum breaker with a 3/8 inch FNPT connection rated for 125 psi. It protects potable water systems by preventing back-siphonage when supply pressure drops. The silicone seal operates up to 212 degrees Fahrenheit. It meets Build America Buy America and Buy American Act requirements.
Installation and system fit
The unit threads directly onto a 3/8 inch female NPT port without additional adapters. Its compact height of 2 3/8 inches and width of 1 13/16 inches allow placement in tight mechanical rooms or fixture cavities. The bronze body resists corrosion from chlorinated water. No external power or control wiring is required for operation.
Sustained pressure and thermal performance
Under continuous 125 psi supply pressure the bronze housing maintains structural integrity without creep. The silicone seal retains elasticity through repeated thermal cycles up to 212 degrees Fahrenheit. The poppet returns reliably after each vacuum event, preventing leakage during prolonged low-pressure periods. The device contains no moving parts that fatigue under constant flow conditions.
Highlights
- Prevents backflow with 125 psi bronze construction
- Withstands 212 °F for hot-water installations
- Compact 2 3/8 in height fits tight spaces
- Meets BABA and Buy American Act requirements
- 3/8 in FNPT connection for standard plumbing fit
Specifications
| Brand | APOLLO |
|---|---|
| Size | 3/8" |
| Type | Other |
Questions about this item
What is the maximum working pressure of the 3/8 in FNPT bronze vacuum breaker?
The vacuum breaker is rated for a maximum pressure of 125 psi.
How hot can the fluid get before the silicone seal reaches its temperature limit?
The seal is rated for a maximum temperature of 212 Degrees F.
Which piping standard must the existing supply line match for a direct thread connection?
The inlet uses a 3/8 in FNPT connection requiring a matching MNPT thread.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



