Advance Tabco
Advance Tabco FC-1-1818-X Wall Mounted Sink 18 in x 18 in, 304
- Silver
$790.99
0.00925633BTC
In stock
Apollo
Apollo 36LF50301 Water Pressure Reducing Valve 1/2 In
Reduces water pressure to an adjustable 25-75 psi range with a 50 psi factory setting, featuring lead-free bronze construction and double union solder connections
- TypeOther
- Adjustable pressure range 25 to 75 psi protects plumbing
- Factory preset to 50 psi for immediate balanced flow
- Lead-free bronze construction meets CA AB1953 and VT Act 193
- ASSE 1003 and CSA B356 certified for safety compliance
- Rated to 300 psi working pressure and 180 °F max temperature
Pressure-Reducing Valve 1/2 In
The Apollo 36LF50301 is a lead-free bronze water pressure reducing valve built for residential and light-commercial plumbing. It features a double union solder connection and an adjustable outlet range of 25 to 75 psi with a factory setting of 50 psi. The unit is certified to ASSE 1003 and CSA B356 standards and complies with CA AB1953 and VT ACT 193 requirements.
Suitable for New Installations Only
This valve suits plumbers and contractors fitting new potable-water systems that require code-compliant pressure control. It is not intended for repair kits or retrofit cartridges where the existing body must stay in place. Buyers needing a threaded connection instead of solder unions should look at a different model.
Double Union Solder Connection Decides Fit
The 1/2 inch double union solder ends determine whether this valve integrates directly into copper pipework without adapters. If the job calls for threaded, push-fit or larger diameter connections, this specific valve will not match the piping layout.
Highlights
- Adjustable pressure range 25 to 75 psi protects plumbing
- Factory preset to 50 psi for immediate balanced flow
- Lead-free bronze construction meets CA AB1953 and VT Act 193
- ASSE 1003 and CSA B356 certified for safety compliance
- Rated to 300 psi working pressure and 180 °F max temperature
Specifications
| Brand | APOLLO |
|---|---|
| Type | Other |
Questions about this item
How do I verify the valve is reducing pressure correctly after installation?
Check that downstream pressure reads near the 50 psi factory setting and stays within the 25 to 75 psi adjustable range under normal flow.
What comes in the box and what extra parts are needed for a 1/2 inch double union solder installation?
The valve body with lead free bronze construction is supplied; you must provide solder, flux and two 1/2 inch copper pipe ends for the double union solder connections.
Which pressure setting version should I choose for a residential system that needs about 50 psi?
This model is factory set at 50 psi and adjustable from 25 to 75 psi, so it covers the typical residential target without needing a different version.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
