Advance Tabco
Advance Tabco FC-1-1818-X Wall Mounted Sink 18 in x 18 in, 304
- Silver
$790.99
0.00923676BTC
In stock
Apollo
Apollo 36LF20401 Water Pressure Reducing Valve 3/4 In
Reduces incoming water pressure to an adjustable 25 to 75 psi range with a 50 psi factory setting
- TypeOther
- Adjustable pressure range 25 to 75 psi protects downstream fixtures
- Factory preset at 50 psi for immediate balanced flow
- Lead-free bronze construction meets CA AB1953 and VT Act 193 compliance
- Rated for 300 psi maximum working pressure and 180 °F service temperature
- Certified to ASSE 1003 and CSA B356 standards for code acceptance
Pressure-Reducing Valve for Residential Supply
The Apollo 36LF20401 reduces incoming water pressure to a safer level for household plumbing. It fits 3/4 inch NPT connections and is built from lead-free bronze. The valve is certified to ASSE 1003 and CSA B356 standards. Suitable for new installations or replacement in potable water systems.
Factory Pressure Setting and Adjustable Range
The unit ships preset at 50 psi and can be adjusted between 25 and 75 psi to match local code or system requirements. This single setting determines whether the valve will protect fixtures without starving flow. Verify the required outlet pressure before selecting this model.
Sustained Operation at Rated Limits
The bronze body withstands a maximum working pressure of 300 psi and continuous water temperatures up to 180 degrees Fahrenheit. These ratings apply to steady-state service rather than momentary spikes. The valve meets CA AB1953 and VT ACT 193 lead-free compliance for long-term potable use.
Highlights
- Adjustable pressure range 25 to 75 psi protects downstream fixtures
- Factory preset at 50 psi for immediate balanced flow
- Lead-free bronze construction meets CA AB1953 and VT Act 193 compliance
- Rated for 300 psi maximum working pressure and 180 °F service temperature
- Certified to ASSE 1003 and CSA B356 standards for code acceptance
Specifications
| Brand | APOLLO |
|---|---|
| Type | Other |
Questions about this item
What does the 50 psi factory setting mean once the valve is installed?
The valve arrives preset to 50 psi, so downstream pressure will be held near that level until you adjust it using the 25-75 psi range.
What does the ASSE 1003/CSA B356 standard cap in practice?
The ASSE 1003/CSA B356 certification confirms the valve meets performance requirements for water pressure reducing valves in plumbing systems.
What pipe size and thread type does the 3/4 inch NPT x NPT connection need?
It requires 3/4 inch NPT male threads on both the inlet and outlet piping for a direct threaded fit.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
