We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Bronze water pressure reducing valve with single union NPT connections

Apollo

Apollo 36LF10801 2 In Water Pressure Reducing Valve

SKU CH-KHHM-HP2CV

Reduces incoming water pressure to an adjustable 25 to 75 psi range, factory set at 50 psi, with a 300 psi maximum working pressure and 180 °F temperature rating

  • TypeOther
  • Lead-free bronze construction meets CA AB1953 and VT ACT 193
  • Adjustable 25-75 psi range with 50 psi factory setting
  • ASSE 1003/CSA B356 certified for code compliance
  • 300 PSI max working pressure handles demanding systems
  • 180°F max temperature suits hot water applications

Apollo 2 Inch Pressure Reducing Valve

This Apollo valve reduces incoming water pressure to a safer level for residential or light-commercial plumbing systems. It is built from lead-free bronze and carries certifications for low-lead compliance in multiple jurisdictions. The single-union NPT connections suit standard 2 inch piping. Installers and facility managers specify it where code requires pressure control.

Installation notes and common issues

The valve threads directly onto 2 inch NPT pipe ends using the single union fitting. Proper orientation follows the flow arrow cast on the body. A frequent error is overtightening the union, which can distort the bronze seating surface and cause leaks. Debris in new pipework should be flushed before the valve is commissioned to prevent seat damage.

Pre-order checklist for your system

Verify that the supply line pressure does not exceed 300 psi, the maximum working pressure for this model. Confirm the piping material is compatible with NPT threads and that the 11-1/2 inch height and 8-1/2 inch length fit the available space. The adjustable range of 25 to 75 psi must cover your target downstream pressure.

Highlights

  • Lead-free bronze construction meets CA AB1953 and VT ACT 193
  • Adjustable 25-75 psi range with 50 psi factory setting
  • ASSE 1003/CSA B356 certified for code compliance
  • 300 PSI max working pressure handles demanding systems
  • 180°F max temperature suits hot water applications

Specifications

BrandAPOLLO
TypeOther

Questions about this item

How do I verify the valve is reducing pressure to the factory-set 50 psi after installation?

Use a downstream pressure gauge; the valve should read 50 psi with no flow and stay within the 25-75 psi adjustable range when fixtures are running.

What components come with the 2-inch single-union NPT valve and what must be sourced separately?

The box contains the lead-free bronze valve body with factory-set 50 psi spring; pipe dope, thread sealant, and a downstream pressure gauge are not included.

Which adjustable-range version should I choose for a system that needs 50 psi outlet pressure?

The 25-75 psi adjustable range covers a 50 psi target, so this model is the correct choice; no other range is offered for this part number.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.