We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Apollo 36LF10301 pressure reducing valve, lead-free bronze, half-inch NPT connections

Apollo

Apollo 36LF10301 Pressure Reducing Valve 1/2 In Lead Free Bronze

SKU CH-QGDS-3310S

A lead-free bronze pressure reducing valve with a 1/2-inch NPT connection, adjustable from 25 to 75 psi and factory set at 50 psi

  • TypeOther
  • Lead-free bronze construction meets CA AB1953 and VT ACT 193 standards
  • Adjustable 25-75 psi range with 50 psi factory setting for precise control
  • 300 psi maximum working pressure handles demanding supply lines
  • ASSE 1003 and CSA B356 certified for code-compliant installations
  • 180 °F temperature rating suits hot-water distribution systems

Lead-Free Bronze Pressure Valve

The Apollo 36LF10301 is a water pressure reducing valve built from lead-free bronze for potable water systems. It fits residential and light commercial plumbing where supply pressure must be lowered to protect fixtures and piping.

Single Union NPT Connections

The valve uses a single union with NPT threads on both inlet and outlet for straightforward installation on half-inch pipe. Rated for a maximum working pressure of 300 psi and temperatures up to 180 degrees Fahrenheit, it meets ASSE 1003 and CSA B356 standards along with California AB1953 and Vermont Act 193 compliance.

Adjustable 25 to 75 PSI Range

Factory set at 50 psi, the adjustable range lets installers match downstream pressure to system needs without replacing the valve. It suits upgrades from fixed-setting or non-compliant bronze valves where lead-free materials and field adjustability are required.

Highlights

  • Lead-free bronze construction meets CA AB1953 and VT ACT 193 standards
  • Adjustable 25-75 psi range with 50 psi factory setting for precise control
  • 300 psi maximum working pressure handles demanding supply lines
  • ASSE 1003 and CSA B356 certified for code-compliant installations
  • 180 °F temperature rating suits hot-water distribution systems

Specifications

BrandAPOLLO
TypeOther

Questions about this item

What is the adjustable pressure range and factory setting for this 1/2 inch valve?

The valve adjusts from 25 to 75 psi and is factory set at 50 psi.

What pipe size and connection type does the Apollo 36LF10301 require?

It fits 1/2 inch NPT threads on both inlet and outlet with a single union design.

How is the pressure setting changed after the valve is installed?

Turn the adjustment screw on top of the valve body clockwise to raise pressure or counter-clockwise to lower it.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.