We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Bronze water pressure reducing valve with double union NPT connections

Apollo

Apollo 36ELF12501T Water Pressure Reducing Valve 1 In

SKU CH-QAA7-48PHS

A lead-free bronze pressure-reducing valve with 1-inch double union NPT connections, adjustable from 15 to 75 psi and factory set at 50 psi

  • TypeOther
  • Adjustable 15–75 psi range suits varied supply pressures
  • Factory preset to 50 psi for immediate balanced flow
  • Lead-free bronze body meets NSF/ANSI 61 and CA AB1953
  • Double union NPT connections simplify installation and servicing
  • Rated to 400 psi working pressure and 180 °F temperature

Pressure Reducing Valve 1 Inch

The Apollo 36ELF12501T is a water pressure reducing valve designed for potable water systems. Its lead-free bronze body meets NSF/ANSI 61 and low-lead compliance standards. The double union NPT connection simplifies installation on 1-inch piping. Adjustable outlet pressure ranges from 15 to 75 psi with a factory setting of 50 psi.

Suits 1-Inch Lines Not High-Capacity Mains

This valve suits residential or light commercial lines requiring pressure reduction to 75 psi or below. Installers needing a compact union-ended bronze valve for 180°F maximum temperature will find it suitable. It is not for systems exceeding 400 psi working pressure or demanding flow rates beyond the capacity of a 1-inch port. Buyers needing larger diameters or higher pressure settings should look at other models.

Adjustable Range 15-75 PSI Decides Fit

The single specification that decides fit is the adjustable outlet pressure range of 15 to 75 psi. If the downstream system requires pressure outside this window, this valve cannot meet the requirement. The factory preset of 50 psi covers many codes, but the adjustment limits are fixed. Verify the required set point falls within the 15-75 psi band before selecting this part.

Highlights

  • Adjustable 15–75 psi range suits varied supply pressures
  • Factory preset to 50 psi for immediate balanced flow
  • Lead-free bronze body meets NSF/ANSI 61 and CA AB1953
  • Double union NPT connections simplify installation and servicing
  • Rated to 400 psi working pressure and 180 °F temperature

Specifications

BrandAPOLLO
TypeOther

Questions about this item

How do I verify the valve is regulating pressure correctly after installation?

Check the outlet pressure with a gauge while water flows; the factory setting is 50 psi and the adjustable range is 15-75 psi.

What comes in the box and what fittings must I supply?

The valve body with double union NPT ends is included; you must provide 1 in. NPT pipe nipples or adapters for your plumbing.

Which pressure setting version should I choose for a typical residential supply?

This model is set at 50 psi and adjustable from 15 to 75 psi, covering normal residential requirements.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.