We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Bronze water pressure reducing valve with double union solder connections, 3/4 inch inlet/outlet

Apollo

Apollo 36ELF12401S Water Pressure Reducing Valve 3/4 In

SKU CH-4BWX-GHV1D

Reduces water pressure to an adjustable 15-75 psi range with a 50 psi factory setting for 3/4 inch plumbing systems

  • TypeOther
  • Lead-free bronze construction meets NSF/ANSI 61 and California AB1953 standards
  • Adjustable 15-75 psi range factory set at 50 psi for consistent pressure control
  • Double union solder connections simplify installation and future maintenance
  • Rated for 400 psi working pressure and 180 °F maximum temperature
  • Certified to ASSE 1003 and CSA B356 performance standards

3/4 In Pressure Reducing Valve

The Apollo 36ELF12401S reduces incoming water pressure to a factory-set 50 psi within an adjustable 15-75 psi range. It is intended for residential or light-commercial plumbing systems that require consistent downstream pressure protection.

Lead Free Bronze Double Union Solder Build

The valve body uses lead-free bronze certified to NSF/ANSI 61 Annex F & G, CA AB1953 and VT Act 193. Double union solder connections allow the unit to be removed for service without cutting pipe, while the 400 psi maximum working pressure and 180 °F temperature rating suit typical domestic hot and cold lines.

Replaces Worn or Non-Compliant Pressure Regulators

Installers choose this model when an existing regulator no longer holds pressure or fails lead-free compliance standards. The ASSE 1003/CSA B356 listing confirms performance to recognised North American codes, making the swap straightforward on 3/4 inch copper systems.

Highlights

  • Lead-free bronze construction meets NSF/ANSI 61 and California AB1953 standards
  • Adjustable 15-75 psi range factory set at 50 psi for consistent pressure control
  • Double union solder connections simplify installation and future maintenance
  • Rated for 400 psi working pressure and 180 °F maximum temperature
  • Certified to ASSE 1003 and CSA B356 performance standards

Specifications

BrandAPOLLO
TypeOther

Questions about this item

What adjustable pressure range does the 3/4 inch Apollo valve cover?

The valve adjusts from 15 to 75 psi with a factory setting of 50 psi.

What pipe preparation is required for the double union solder connections?

Clean and flux 3/4 inch copper pipe ends, then solder each union tailpiece before threading the valve body into place.

In what order should the valve body and union nuts be assembled to avoid leaks?

Solder the tailpieces to the pipe first, cool them, then install the valve body between the union nuts and tighten.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.