We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Bronze water pressure reducing valve with single union NPT connections, 1/2 inch, adjustable 15-75 psi

Apollo

Apollo 36ELF11301T 1/2 In. Water Pressure Reducing Valve

SKU CH-877W-BT9KK

Reduces water pressure to an adjustable 15-75 psi range with a 50 psi factory setting for 1/2 inch NPT plumbing systems

  • TypeOther
  • Adjustable 15-75 psi range suits varied plumbing needs
  • Factory preset at 50 psi for quick installation
  • Lead-free bronze meets NSF/ANSI 61 and CA AB1953
  • Rated to 400 psi working pressure for durability
  • Certified to ASSE 1003 and CSA B356 standards

1/2 Inch Pressure Reducing Valve

The Apollo 36ELF11301T is a lead-free bronze valve designed to lower incoming water pressure to a safer level for residential plumbing systems. It suits homeowners and plumbers who need reliable pressure control on a half-inch supply line.

Simple Union Installation

The valve uses a single union NPT by NPT connection that threads onto standard half-inch pipe without special tools. Overtightening the union can damage the bronze body, so hand-tight plus one turn is the usual practice.

Verify Pressure and Temperature Limits

Confirm your supply pressure does not exceed 400 psi and that water temperature stays at or below 180 degrees Fahrenheit. The factory setting is 50 psi with an adjustable range of 15 to 75 psi, so ensure that range matches your system requirements.

Highlights

  • Adjustable 15-75 psi range suits varied plumbing needs
  • Factory preset at 50 psi for quick installation
  • Lead-free bronze meets NSF/ANSI 61 and CA AB1953
  • Rated to 400 psi working pressure for durability
  • Certified to ASSE 1003 and CSA B356 standards

Specifications

BrandAPOLLO
TypeOther

Questions about this item

How do I verify the valve is regulating pressure correctly after installation?

Use a pressure gauge on a downstream fixture; the factory setting is 50 psi and the adjustable range is 15 to 75 psi.

What comes in the box and what must I supply myself?

The valve body with single union NPT connections is included; pipe fittings, thread sealant and a pressure gauge are not.

Which version should I choose for a standard residential supply line?

This model has a 1/2 inch inlet and outlet, 400 psi maximum working pressure and NSF/ANSI 61 certification for potable water.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.