We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Bronze pressure reducing valve with press connections

Apollo

Apollo 36ELF10301PR 1/2 In. Pressure Reducing Valve

SKU CH-0KGC-SQG3H MPN 36ELF10301PR

A 1/2 in. press-connection valve that reduces incoming water pressure to an adjustable 15 to 75 psi range, factory set at 50 psi, with a 250 psi maximum working pressure and 180 °F temperature rating

  • TypeDrain Components
  • Adjustable pressure range from 15 to 75 psi for flexible system control
  • Factory preset at 50 psi for immediate balanced performance
  • Low-lead bronze construction meets NSF/ANSI 61 and ASSE 1003 standards
  • Press connection design simplifies installation on 1/2 in. piping
  • Rated for 250 psi working pressure and 180°F maximum temperature

1/2 In. Pressure Reducing Valve

The Apollo 36ELF10301PR is a water pressure reducing valve built from low lead bronze with press connections. It suits residential and light commercial plumbing systems that require accurate pressure control at the point of entry. The valve carries NSF/ANSI 61, ASSE 1003 and CSA B356 certifications.

Installers needing adjustable 15 to 75 psi range

This valve fits systems where supply pressure reaches 250 psi and a 50 psi factory setting provides a reliable starting point. It is not for steam lines, high temperature service above 180 degrees Fahrenheit, or installations that demand a larger connection size than 1/2 inch.

Sustained pressure regulation at 250 psi max

Under continuous demand the bronze body and press ends maintain the set pressure without creep, while the adjustable spring holds the outlet between 15 and 75 psi. The 4-3/4 inch height and 5-1/2 inch length allow it to remain stable in tight mechanical rooms during prolonged flow.

Highlights

  • Adjustable pressure range from 15 to 75 psi for flexible system control
  • Factory preset at 50 psi for immediate balanced performance
  • Low-lead bronze construction meets NSF/ANSI 61 and ASSE 1003 standards
  • Press connection design simplifies installation on 1/2 in. piping
  • Rated for 250 psi working pressure and 180°F maximum temperature

Specifications

TypeDrain Components
BrandApollo
Model36ELF10301PR

Questions about this item

What pipe size and connection type must my plumbing have for this 1/2 In. press-connection valve?

The valve is built for 1/2 In. press connections on both inlet and outlet, so your supply lines must match that size and press-fit method.

Will the factory pressure setting of 50 psi work with my existing 250 PSI supply without adjustment?

Yes, the unit is rated for a maximum working pressure of 250 PSI and ships preset to 50 psi, which sits inside the adjustable 15 to 75 psi range.

How can I confirm the valve is regulating pressure correctly after installation?

Attach a gauge downstream; a steady reading at or near the 50 psi factory setting under flow indicates the valve is operating as intended.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.