We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Bronze gate valve with wheel handle, press connection

Apollo

Apollo 30LF03601PR Drain Trap 1-1/4 In. Low Lead Bronze

SKU CH-GSX0-FTMS2 MPN 30LF03601PR

A 1-1/4 inch low-lead bronze gate valve rated for 200 psi water and steam service with an 80 Cv flow coefficient

  • TypeDrain Components
  • Low-lead bronze body meets strict water-safety standards
  • Rated for 200 psi water and steam service
  • 80 Cv coefficient delivers high flow capacity
  • Non-rising bronze stem simplifies maintenance access
  • Press-type female connection speeds installation time

1-1/4 Inch Bronze Gate Valve

This Apollo 30LF03601PR gate valve controls water flow in plumbing systems using a 1-1/4 inch press connection. The low-lead bronze body and bronze wedge resist corrosion while meeting low-lead requirements. A non-rising stem with wheel handle allows straightforward operation. Rated for 200 psi water and steam pressure with an 80 Cv flow coefficient.

Suits Press-Fit Installations

Installers who use press tooling on 1-1/4 inch tubing will find the press end compatible and the bronze construction durable. The screw-in bonnet and EPDM seal simplify maintenance. Buyers needing threaded, solder or flanged ends should look at other valve styles because this model only offers a press connection on one side.

200 psi Pressure Rating Decides Fit

The 200 psi maximum operating pressure for both water and steam is the single specification that determines whether this valve matches the system design. If the application exceeds this pressure, a higher-rated valve is required. The 80 Cv coefficient also indicates the flow capacity for sizing calculations.

Highlights

  • Low-lead bronze body meets strict water-safety standards
  • Rated for 200 psi water and steam service
  • 80 Cv coefficient delivers high flow capacity
  • Non-rising bronze stem simplifies maintenance access
  • Press-type female connection speeds installation time

Specifications

TypeDrain Components
BrandApollo
Model30LF03601PR

Questions about this item

How do I install the 1-1/4 in. press connection on this bronze gate valve, and what step is often missed?

Clean and deburr the pipe end, then press with a calibrated tool matched to the 1-1/4 in. size; the step often missed is verifying full insertion depth before pressing.

Which internal parts of this Apollo 30LF03601PR will need replacement after long service?

The EPDM seal and the bronze wedge are the wear items; the non-rising stem and screw-in bonnet are designed for the valve's full life.

What is the first pressure limit reached when this valve handles hot water continuously at 200 psi?

The 200 psi steam rating is the first limit encountered under sustained high-temperature use, matching the 200 psi operating pressure ceiling.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.