We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Bronze gate valve with wheel handle and press connection

Apollo

Apollo 30LF00401PR 3/4 in Gate Valve 200 psi

SKU CH-D0FA-J8QGF MPN 30LF00401PR

A 3/4 inch gate valve rated for 200 psi water or steam service with a 24 Cv flow coefficient

  • TypeDrain Components
  • Rated for 200 psi water and steam service
  • Low-lead bronze body meets California Proposition 65 requirements
  • Rising bronze stem with solid bronze wedge for reliable shut-off
  • EPDM seals and bronze seat resist corrosion in potable water
  • Press-fit female connection enables fast, solder-free installation

Apollo 3/4 in Gate Valve 200 psi

The Apollo 30LF00401PR is a 3/4 inch gate valve built from low-lead bronze for water supply lines. It serves plumbing professionals and maintenance crews who need a reliable shut-off device rated for 200 psi working pressure.

Press connection limits for bronze gate valves

The press end on side one creates a permanent joint that cannot be disassembled without cutting the pipe, so the valve must be oriented correctly before the tool engages. The bronze body and EPDM seal tolerate 200 psi for water and steam, but the connection method prevents easy removal for system changes.

Rising-stem installation and common issues

A rising stem shows valve position visually, yet the screw-in bonnet requires sufficient clearance above the handle to turn fully. Installers sometimes over-tighten the press tool or forget to deburr the tube, which can damage the seal and cause leaks at 200 psi.

Highlights

  • Rated for 200 psi water and steam service
  • Low-lead bronze body meets California Proposition 65 requirements
  • Rising bronze stem with solid bronze wedge for reliable shut-off
  • EPDM seals and bronze seat resist corrosion in potable water
  • Press-fit female connection enables fast, solder-free installation

Specifications

TypeDrain Components
BrandApollo
Model30LF00401PR

Questions about this item

Should I pick the 3/4 in model or another size?

The 3/4 in size matches 3/4 in piping; the Cv of 24 shows its flow capacity for water systems.

What does the 200 psi rating mean in daily use?

The valve handles water or steam up to 200 psi operating pressure, so it suits typical residential and light commercial lines.

How does the press connection affect installation?

The press end joins copper tube with a press tool, eliminating threading or soldering on that side.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.