We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
APG CD-D1D2 320 MultiPRO splitter cable kit with one RJ12 plug and two RJ12 ports

APG Cash Drawer

APG Cash Drawer CD-D1D2 320 MultiPRO Splitter Cable Kit Dual Drawer RJ12

SKU CH-FC4M-QCN48

Connects one POS port to two cash drawers using RJ12 plugs

  • Typesplitter cable
  • Connects two cash drawers to one POS port using the included 320 mm MultiPRO splitter cable
  • RJ12 6P6C plugs on all three ends ensure a secure connection for each drawer
  • Single cable kit reduces clutter and simplifies installation at the checkout
  • Supports dual-drawer operation so two tills can share one printer or terminal port

APG Cash Drawer Splitter Cable for Dual Drawers

The APG CD-D1D2 320 MultiPRO splitter cable connects two cash drawers to a single point-of-sale port. It uses a 6P6C modular plug (RJ12) that splits into dual 6P6C modular plugs (RJ12). This kit suits retailers who need to operate two drawers from one printer or terminal interface.

Passive Cable With No Power Or Cooling Requirements

The cable assembly draws no power and produces no heat or noise during operation. It adds no load to the host device beyond the normal signalling current of the RJ12 interface. Because it is a passive wiring harness, it imposes no thermal or acoustic impact on the surrounding equipment.

Highlights

  • Connects two cash drawers to one POS port using the included 320 mm MultiPRO splitter cable
  • RJ12 6P6C plugs on all three ends ensure a secure connection for each drawer
  • Single cable kit reduces clutter and simplifies installation at the checkout
  • Supports dual-drawer operation so two tills can share one printer or terminal port

Specifications

Typesplitter cable
BrandAPG
ModelCD-D1D2
Shipping weight0.09 kg
Package size254 × 254 × 254 mm

Questions about this item

How is the 320 MultiPRO splitter cable installed, and which connection step do people often get wrong?

Plug the single RJ12 end into the printer or POS port, then connect both drawers to the two RJ12 branches; the common mistake is reversing the single and dual ends so the host sees no drawer.

What maintenance will the CD-D1D2 splitter cable need later?

Inspect the 12 modular contacts for bent pins or dust every few months; reseat both RJ12 plugs if a drawer stops firing, and replace the cable if the latch tabs snap off.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.