Apex Tool Group, LLC
Apex Tool Group 7SASL electrician tool 45° curved tip .28 × .41 mm 512 °F
Fine-point curved tweezers in stainless steel resist acid, magnetism, heat and corrosion up to 512 °F
- 45° curved tips reach tight components
- .28 × .41 mm points handle fine wire work
- Stainless steel resists acid, heat and corrosion
- Withstands 512 °F for demanding environments
- 4 1/2 in length gives precise manual control
Precision curved tweezers for fine work
The Apex Tool Group 7SASL is a stainless-steel precision tweezer with a 45 degree curved tip measuring .28 by .41 mm. It suits technicians who need a fine point for component handling, inspection or rework under magnification. The smooth tips and plain grip give direct tactile feedback without coatings that wear off. Buyers who need a wider blade or a self-closing action will not find it here.
Heat resistance and manual operation
The tool withstands temperatures up to 512 degrees Fahrenheit, so it survives brief contact with hot surfaces or soldering workflows. Stainless steel resists acid, magnetic fields and corrosion without special maintenance. The manual mechanism has no springs or hinges to fatigue, keeping alignment consistent over long sessions. No power source or cooling is required.
Economy finish keeps cost low
The Economy EREM designation means the tweezers ship without premium packaging, calibration certificates or specialised tip coatings. The stainless material and tip geometry are the same as higher-tier versions, so the functional result is unchanged. Users who need traceable documentation or anti-static surfaces must source those separately. The bare-metal finish is ready for immediate use.
Highlights
- 45° curved tips reach tight components
- .28 × .41 mm points handle fine wire work
- Stainless steel resists acid, heat and corrosion
- Withstands 512 °F for demanding environments
- 4 1/2 in length gives precise manual control
Specifications
| Brand | Erem |
|---|---|
| Model | 7SASL |
Questions about this item
How do I position the 45° curved tips to grip a 0.28 mm wire without bending it?
Align the curved tips parallel to the wire, then close the plain grip gently; the 0.41 mm tip thickness distributes force so the 0.28 mm width contacts first.
What upkeep keeps the stainless steel tips acid- and corrosion-resistant at 512 °F?
Wipe tips with isopropyl alcohol after each use; avoid abrasive pads that would scratch the smooth 0.28 × 0.41 mm surfaces.
At what point does heat become the limiting factor during prolonged soldering?
The 512 °F maximum temperature is the first limit; sustained exposure above it degrades the stainless steel’s magnetic and acid resistance.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
