APC
APC SRTL3KRM1UWNC 3000VA Lithium-ion UPS 208/230V 1U 3xC13 2xC19 Network Card Rail Kit
On-line 3000 VA lithium-ion UPS in a 1U rack mount with three C13 and two C19 outlets, network card and rail kit included
- Lithium-ion battery recharges fully in 1.50 hours
- On-line double-conversion topology delivers pure sine-wave output
- 1U rack form factor fits dense server cabinets
- 3000 VA capacity supports critical 208/230 V loads
- Network management card enables remote monitoring and control
3000VA Lithium-ion UPS for dense racks
The APC SRTL3KRM1UWNC is a 3000VA on-line UPS built on a lithium-ion battery platform. It fits in a single rack unit and accepts 208 or 240 V input while delivering pure sine-wave output at 208 or 240 V AC. The unit targets server rooms and edge sites that need high power density without deep cabinets.
Capacity and runtime boundaries
At full load the battery provides 4.60 minutes of standby time, enough for graceful shutdowns or bridging short generator starts. Recharge completes in 1.50 hours, so the reserve is ready again quickly after an event. The five IEC outlets — three C13 and two C19 — support mixed plug types but the total apparent power cannot exceed the 3000VA rating.
Network card and rail kit impact
The pre-installed network management card enables remote monitoring and control over IP without adding a separate accessory. Included mounting rails allow tool-less installation in standard 19-inch racks, reducing deployment time compared to units that ship rails separately. USB and the front LCD give local status when network access is not available.
Highlights
- Lithium-ion battery recharges fully in 1.50 hours
- On-line double-conversion topology delivers pure sine-wave output
- 1U rack form factor fits dense server cabinets
- 3000 VA capacity supports critical 208/230 V loads
- Network management card enables remote monitoring and control
Specifications
| Brand | APC |
|---|---|
| Shipping weight | 24.49 kg |
| Package size | 762 × 559 × 279 mm |
Questions about this item
Will the 208 V or 230 V input work with my existing 240 V AC supply?
The UPS accepts both 208 V and 240 V AC input, so a 230 V supply is within the supported range.
How can I confirm the 3000 VA on-line unit is delivering pure sine-wave output after installation?
The front LCD shows real-time voltage, load percentage and battery status, and the USB port supports management software for detailed waveform verification.
Does the rail kit and network card ship in the box, or must I order them separately?
The rail kit and network management card are included; the unit also provides three C13 and two C19 IEC outlets for immediate connection.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



