We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 1U rack-mount UPS with LCD screen and four NEMA 5-15R outlets

APC

APC SMT750RM1U 1U Rack UPS 750 VA 600 W 4×NEMA 5-15R LCD AVR USB 16 GB 3.0 Drive

SKU CH-GP06-YXTJ6

1U rack-mount UPS delivers 750 VA / 600 W with AVR, LCD status display, four NEMA 5-15R outlets and includes a 16 GB USB 3.0 drive

  • 1U rack-mount design saves 23% depth for dense server racks
  • 750 VA and 600 W capacity delivers 25% more power for critical loads
  • LCD status display shows load, runtime and UPS health at a glance
  • AVR double boost and trim stabilises voltage without using battery
  • USB port enables PowerChute graceful shutdown of servers and VMs

Compact 1U Rack UPS

The APC SMT750RM1U is a 1U rack-mountable battery backup delivering 750 VA and 600 W through four NEMA 5-15R outlets. It targets IT administrators protecting wireless networks, computers and small electronics in server rooms or commercial racks where depth is limited. A bundled 16 GB USB 3.0 drive is included for firmware or configuration storage.

LCD Monitoring and AVR Limits

An LCD status display shows load capacity, battery runtime and UPS status at a glance. Automatic Voltage Regulation uses double boost and trim to correct low and high voltage without switching to battery, but it cannot compensate for sustained outages or input voltages outside its regulation window. The USB communication port works with PowerChute software for graceful shutdown of physical servers, virtual machines and HCI clusters during extended power loss.

Upgrade from Desktop UPS

This unit replaces tower-style desktop UPS models that cannot fit a 1U rack space or lack network-managed shutdown capability. The 23 % depth reduction and higher power factor make the jump worthwhile when rack density and remote management become requirements. It is not suited for loads exceeding 600 W or for environments needing extended runtime beyond the internal battery capacity.

Highlights

  • 1U rack-mount design saves 23% depth for dense server racks
  • 750 VA and 600 W capacity delivers 25% more power for critical loads
  • LCD status display shows load, runtime and UPS health at a glance
  • AVR double boost and trim stabilises voltage without using battery
  • USB port enables PowerChute graceful shutdown of servers and VMs

Specifications

No published specifications for this item yet.

Questions about this item

Should I choose the 750 VA or 600 W rating when sizing my load?

Size the load by the 600 W figure; the 750 VA rating represents apparent power, while the 600 W limit is the real power the UPS can deliver continuously.

What does the 600 W output capacity mean for my connected equipment?

It means the UPS can supply up to 600 watts of real power to attached devices, so the combined wattage of all plugged-in gear must stay at or below that level.

How does the USB 3.0 interface affect the PowerChute connection?

The USB 3.0 port provides a high-speed link for PowerChute software to monitor status and trigger graceful shutdowns during outages.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.