We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
APC AP8865 metered 0U rack PDU 208V 6ft cord

APC

APC AP8865 Metered 0U 208V 6 ft Pro Sound

SKU CH-W8K8-XQGE4

Metered 0U PDU delivers 208V three-phase power with real-time load monitoring and 24A derated input

  • Weight21
  • Active metering enables energy optimisation and circuit protection
  • User-defined alarms give real-time local and remote overload alerts
  • Power utilisation data supports load balancing and right-sizing decisions
  • Secure Web, SNMP and Telnet interfaces allow remote access and configuration
  • NEMA L21-30P input delivers 208 V three-phase at 24 A derated current

Metered 0U 208 V PDU

This APC AP8865 metered rack PDU mounts vertically in a 0U form factor and accepts three-phase 208 V input through a NEMA L21-30P plug. It delivers real-time power monitoring with user-defined alarm thresholds for local and remote alerts. A temperature and humidity sensor port plus locking IEC receptacles support secure data-centre operations. Weight is 21.

Suitable for managed racks

The unit suits data-centre managers who need active metering and circuit protection without switched outlet control. It works with Web, SNMP and Telnet interfaces and integrates with InfraStruxure management platforms. It is not for single-phase supplies, for installations that require per-outlet switching, or for cabinets that cannot accept a NEMA L21-30P connection.

208 V three-phase input

The defining specification is the 208 V three-phase input rated at 24 A derated current with a NEMA L21-30P connector. This voltage and phase configuration determines whether the PDU matches the facility power feed. Verify the supply matches before deployment.

Highlights

  • Active metering enables energy optimisation and circuit protection
  • User-defined alarms give real-time local and remote overload alerts
  • Power utilisation data supports load balancing and right-sizing decisions
  • Secure Web, SNMP and Telnet interfaces allow remote access and configuration
  • NEMA L21-30P input delivers 208 V three-phase at 24 A derated current

Specifications

BrandSchneider Electric
ModelAP8865
Weight21

Questions about this item

How do I install the AP8865 metered PDU in a rack, and which step is most often missed?

Mount the 0U unit vertically using the supplied brackets, connect the NEMA L21-30P plug to a 208 V three-phase 30 A source, then configure the IP address via Web, SNMP or Telnet before loading equipment; the step most often missed is setting the user-defined alarm thresholds for real-time overload alerts.

What maintenance or replacement will the AP8865 need over its service life?

The unit has no user-replaceable batteries or filters; plan for periodic verification of the ultra low-profile circuit breakers and locking IEC receptacles, and replace the entire PDU if a breaker fails or the metering firmware can no longer receive security updates.

What is the first limit I will hit when running the AP8865 continuously at high load?

The regulatory derated input current of 24 A is the first hard limit; sustained draw above that value will trip the internal circuit breakers even though the NEMA L21-30P inlet is rated for 30 A.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.