APC
APC AP7998B Switched Rack PDU 12.5kW 208V 21xC13 3xC19 10ft
A switched rack PDU delivering 12.5 kW at 208 V through 21 C13 and 3 C19 outlets with a 10 ft cord
- TypeSwitched
- StyleRackmount
- Input Voltage208V
- Input Frequency50/60 Hz
- Input Connector(s)CS8365
- Cord Length10.0 Feet
- Switched control enables remote outlet management
- 5kW at 208V supports high-density rack loads
- 21 C13 and 3 C19 outlets fit diverse equipment
- 0 foot cord with CS8365 plug reaches distant power sources
- Zero U vertical design saves rack space
Switched Rack PDU 12.5 kW 208 V
The APC AP7998B is a switched rackmount power distribution unit designed for data-centre and server-room deployments. It delivers 12.5 kW at 208 V through twenty-one IEC 320 C13 outlets and three IEC 320 C19 outlets. Each outlet can be remotely switched on or off for outlet-level power control. A 10.0-foot cord with a CS8365 plug connects to the facility supply.
Upgrade from basic or metered PDUs
This unit replaces non-switched PDUs when administrators need remote reboot capability and outlet-level monitoring without visiting the rack. The jump is worth it when managing dense 1U or blade servers that benefit from sequenced power-on or scheduled shutdowns. It also adds overload protection across all twenty-four outlets.
Capacity and headroom
The 12.5 kW rating at 208 V supports full-height rack loads with twenty-one C13 and three C19 connections for mixed-density equipment. Headroom exists until the combined draw approaches the 12.5 kW limit or the CS8365 input rating. The zero-U vertical form factor fits 70.00-inch tall racks without consuming horizontal mounting space.
Highlights
- Switched control enables remote outlet management
- 5kW at 208V supports high-density rack loads
- 21 C13 and 3 C19 outlets fit diverse equipment
- 0 foot cord with CS8365 plug reaches distant power sources
- Zero U vertical design saves rack space
Specifications
| Brand | APC |
|---|---|
| Model | AP7998B |
| Type | Switched |
| Style | Rackmount |
| Input Voltage | 208V |
| Input Frequency | 50/60 Hz |
| Input Connector(s) | CS8365 |
| Cord Length | 10.0 Feet |
| Output Voltage | 208V |
| Output Connector(s) | 3 x IEC 320 C19 (Battery Backup) 21 x IEC 320 C13 (Battery Backup) |
| Overload Protection | Yes |
| Dimensions | 70.00" x 2.20" x 3.50" |
| Weight | 21.28 lbs. |
| Shipping weight | 10.43 kg |
| Package size | 1829 × 102 × 76 mm |
Questions about this item
What rack depth and zero-U space does the 70.00-inch AP7998B require?
The unit is 70.00 inches tall, 2.20 inches wide and 3.50 inches deep, so it fits a full-height zero-U channel in a standard 19-inch rack with at least 3.50 inches of clear depth behind the mounting rails.
Which input connector must match the facility outlet before wiring the CS8365 plug?
The PDU ships with a 10.0-foot cord terminated in a CS8365 connector rated for 208V at 50/60 Hz; verify the receptacle is a matching CS8365 before installation.
When should the internal over-current protection be inspected after a trip event?
The built-in overload protection will trip on excess current; after any trip, inspect the branch circuit and reset the PDU before restoring power to the 21 C13 and 3 C19 outlets.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00115078BTC
In stock
