We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Tall black vertical PDU with three-phase input plug and twenty-four IEC outlets

APC

APC AP7968 Switched ZeroU PDU 12.5kW 208V 3PH 35A CS8365 21xC13 3xC19

SKU CH-WBRY-PCHV6

Switched ZeroU PDU delivers 12.5kW three-phase power with 21 C13 and 3 C19 outlets, CS8365 input, and remote outlet control

  • TypeSwitched
  • Rack SizeZero U Rack-mountable
  • Input Voltage208 V AC 10% Three-phase
  • Cord Length36"
  • Output Voltage208 V AC
  • Output Frequency50/60Hz
  • Switched outlets enable remote power cycling per device
  • Three-phase 208 V input delivers 12.5 kW capacity
  • 21 C13 and 3 C19 outlets support dense rack deployments
  • ZeroU vertical mounting preserves horizontal rack space
  • CS8365 35 A plug ensures secure high-current connection

Switched ZeroU PDU 12.5 kW

The APC AP7968 is a switched power distribution unit designed for vertical mounting in a ZeroU footprint. It delivers 12.5 kW of three-phase power at 208 V AC and provides remote outlet switching for individual load control.

Suited for high-density racks needing outlet-level

This unit suits administrators who require per-outlet power cycling and monitoring in a 208 V three-phase environment. It is not for sites running single-phase feeds, installations that cannot accommodate a 35 A CS8365 input, or teams that only need basic unmanaged distribution.

21 C13 and 3 C19 outlets on a 35 A CS8365 feed

The PDU offers 21 IEC 320 C13 and 3 IEC 320 C19 receptacles, all powered through a CS8365 plug rated for 35 A. Matching the cord connector and outlet mix to your equipment cables is the decisive factor for deployment.

Highlights

  • Switched outlets enable remote power cycling per device
  • Three-phase 208 V input delivers 12.5 kW capacity
  • 21 C13 and 3 C19 outlets support dense rack deployments
  • ZeroU vertical mounting preserves horizontal rack space
  • CS8365 35 A plug ensures secure high-current connection

Specifications

BrandAPC
SeriesRack PDU, Switched, Zero U
ModelAP7968
TypeSwitched
Rack SizeZero U Rack-mountable
Input Voltage208 V AC 10% Three-phase
Cord Length36"
Output Voltage208 V AC
Output Frequency50/60Hz
Storage Temperature-13°F (-25°C) to 149°F (65°C)
Storage Relative Humidity5 to 95% Non-condensing
Dimensions70" x 2.20" x 3.50"
Weight17.78 lb

Questions about this item

How do I confirm the APC AP7968 is operating correctly after installation?

Check the local display for nominal 208 V output and verify each of the 21 C13 and 3 C19 outlets shows power; the unit also reports total current draw up to 35 A via its network management interface.

What ships with the AP7968 and what must I source separately?

The PDU arrives with a 36-inch input cord terminated in a CS8365 plug and mounting brackets for Zero U installation; IEC C13 and C19 power cables for your servers are not included.

Which outlet mix should I choose for a 12.5 kW three-phase rack?

This model provides 21 IEC 320 C13 and 3 IEC 320 C19 outlets, suited for dense 208 V three-phase loads up to 35 A; select it when you need both high-density C13 and higher-current C19 connections.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.