Apache Hose Belting, Inc.
Apache Hose Belting, Inc. #20 Alligator Lacing 24 In Steel PK4
Alligator lacing for conveyor belts, 24 inch steel sections in a pack of four
- MaterialHAWA
- Alligator #20 profile fits 5/32 to 3/16 in belt thickness
- 30 in lacing length per strip covers wide conveyor belts
- Steel construction handles 95 piw maximum working tension
- 3 in minimum pulley diameter suits compact drive systems
- Pack of 4 strips provides multiple repair or splice points
Alligator #20 lacing for conveyor repair
This alligator-style lacing joins conveyor belts in material-handling and industrial conveying systems. The #20 size fits belts between 5/32 in and 3/16 in thick and works on pulleys of at least 3 in diameter. Each pack contains four steel lacing strips ready for installation. It suits maintenance crews who need a mechanical splice without vulcanising equipment.
Fits 30 in belt widths and 95 piw tension rating
The 30 in lacing length spans standard belt widths, while the 95 piw maximum working tension covers light to moderate conveying loads. Steel construction resists wear on abrasive lines and allows the splice to run over minimum 3 in pulleys. Connecting pins are not included, so installers must supply compatible hinge pins separately. The pack of four strips supports multiple splices or spare inventory.
Replaces worn mechanical splices on existing belts
This lacing upgrades from damaged or fatigued alligator fasteners on the same belt thickness and tension range. The jump is worthwhile when the old splice shows hinge wear, plate cracking or belt pull-out. It is not for belts thinner than 5/32 in, thicker than 3/16 in, or tensions above 95 piw. Buyers needing endless vulcanised joints or higher tension ratings should seek alternative splicing methods.
Highlights
- Alligator #20 profile fits 5/32 to 3/16 in belt thickness
- 30 in lacing length per strip covers wide conveyor belts
- Steel construction handles 95 piw maximum working tension
- 3 in minimum pulley diameter suits compact drive systems
- Pack of 4 strips provides multiple repair or splice points
Specifications
| Brand | Apache Hose & Belting Co, Inc |
|---|---|
| Material | HAWA |
Questions about this item
How does the 95 piw maximum working tension limit the belt load during continuous operation?
The lacing is rated for a maximum working tension of 95 piw, so the belt load must stay at or below that value to avoid overstressing the splice under sustained use.
Will the steel lacing generate noticeable heat or noise when the conveyor runs all day?
The steel alligator lacing itself does not produce heat or noise; any sound or temperature rise comes from the belt, pulleys and drive system, not from the lacing plates.
What belt thickness and pulley diameter must the installation already have for this #20 lacing to work?
The belt must be between 5/32 in and 3/16 in thick, and the minimum pulley diameter must be at least 3 in for the #20 lacing to engage correctly.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
