Aomoproing
Aomoproing USB C 3.2 Gen2 20Gbps 240W PD 1m 2-pack
Two USB-C 3.2 Gen2 cables deliver 20Gbps data, 240W PD 3.1 charging and 4K@60Hz video
- Charges up to 240W with PD 3.1 and E-Mark chip
- Transfers data at 20Gbps via USB 3.2 Gen 2
- Delivers 4K video at 60Hz to external displays
- Works with Thunderbolt 3 and 4 ports
- Two 1-metre cables included for flexible setup
Two-pack USB-C 3.2 Gen 2 cables
This pack contains two USB-C to USB-C cables rated for USB 3.2 Gen 2 operation. Each cable is one metre long and includes an E-Marker chip for Power Delivery negotiation. They suit users who need spare or replacement cables for charging and data transfer between USB-C devices.
Thermals noise and power draw
The cables are passive assemblies with no active cooling, so they produce no audible noise during use. Power delivery supports up to 240 watts at 50 volts and 5 amps with compatible PD 3.1 adapters, and the E-Marker ensures safe negotiation at lower levels such as 100, 96, 87, 61, 60, 30, 18 and 15 watts.
20 Gbps data and 4K video
The decisive specification is the 20 Gbps maximum data rate, which only activates when both host and peripheral support USB 3.2 Gen 2. The cables also carry DisplayPort alternate mode for 4K resolution at 60 Hz video output. Buyers whose ports are limited to USB 3.1 or USB 2.0 will not achieve the rated throughput.
Highlights
- Charges up to 240W with PD 3.1 and E-Mark chip
- Transfers data at 20Gbps via USB 3.2 Gen 2
- Delivers 4K video at 60Hz to external displays
- Works with Thunderbolt 3 and 4 ports
- Two 1-metre cables included for flexible setup
Specifications
No published specifications for this item yet.
Other versions of this model
5 more in the same range
Same family, different memory, cooler or clock — compare before you commit.
Questions about this item
How do I plug in the USB-C cable so the E-Marker chip negotiates 240 W charging?
Connect the cable to a PD 3.1 charger and a device that both support 50 V / 5 A; the E-Marker chip then enables the full 240 W profile automatically.
When should I replace the cable if the E-Marker chip stops protecting the battery during fast charging?
Replace it if the charger falls back to lower PD 3.0 or QC 3.0 speeds, or if the cable becomes loose, frayed, or intermittently disconnects during 5 A sessions.
What limits the 20 Gbps data rate during long transfers?
Both host and peripheral must be USB 3.2 Gen 2 ports; otherwise the link drops to USB 3.1, 3.0 or 2.0 speeds and sustained throughput falls below 20 Gbps.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector








