Aomoproing
Aomoproing USB 3.1 Type C Extension Cable 90° 10Gbps 30cm
A 30 cm USB 3.1 Type C extension cable with a 90° connector, 10 Gbps bandwidth and 3 A power delivery
- Connector TypeLighting Connector to USB A
- 90° angled connector reduces strain on ports
- 10 Gbps bandwidth enables fast data transfer
- 30 cm flat ribbon cable fits tight spaces
- EMI shielding protects signal integrity
Right-angle USB-C extension for tight spaces
This 30 cm USB 3.1 Type C to Type C cable adds reach while the 90 degree connector keeps the profile low against the device. The flat FPC ribbon construction routes easily behind monitors, docks or VR headsets where a straight plug would foul adjacent ports or panel edges. Rated for 10 Gbps data and 3 A power delivery, it suits high-speed storage, video capture or charging scenarios that demand both bandwidth and a compact bend radius. EMI shielding on the ribbon helps maintain signal integrity in electrically noisy environments.
Thermals noise and power in normal use
The cable carries up to 3 A at 5 V so conductor heating stays minimal during typical charging or data sessions. No active cooling or fan is present, so acoustic output is zero. Power draw is limited to the attached device’s negotiation; the extension itself adds negligible resistance thanks to the shielded flat ribbon design. In sustained 10 Gbps transfers the assembly remains cool to the touch and imposes no audible or thermal burden on the host system.
Highlights
- 90° angled connector reduces strain on ports
- 10 Gbps bandwidth enables fast data transfer
- 30 cm flat ribbon cable fits tight spaces
- EMI shielding protects signal integrity
Specifications
| Connector Type | Lighting Connector to USB A |
|---|
Questions about this item
How do I route the 30 cm flat cable and align the 90° Type-C connector without stressing the FPC ribbon?
Lay the ribbon flat along its full 30 cm length, then insert the 90° plug straight into the port so the bend faces away from the cable; forcing the connector sideways kinks the FPC and breaks the 10 Gbps signal path.
When should I replace the cable if the 3 A power rating drops or the EMI shielding degrades?
Replace it when devices negotiate below 10 Gbps, charging stalls at 3 A, or the flat ribbon shows creases, cuts or exposed conductors that compromise the shielding.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



