We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Short USB 3.0 to Micro B cable with dual screw locking connectors, 30cm

Aomoproing

Aomoproing USB 3.0 to Micro B/M Dual Screw Locking Cable 30cm

SKU CH-WG6N-CCJM7

Connects industrial cameras and scanners with dual screw locking, 30 cm length, 5 Gbps USB 3.0 speed, 9-core double-shielded cable and separate 24 AWG power plus 28 AWG signal wires

  • Cable Length11.81 in. (30cm)

Cable Length 6FT/1.8M

  • Dual screw locking prevents disconnection in harsh industrial environments
  • USB-IF certified 3.0 standard delivers 5Gbps SuperSpeed data transfer
  • 9-core wire with double shielding blocks electromagnetic interference effectively
  • 24AWG power plus 28AWG signal cores ensure stable power and data
  • 30cm length suits compact industrial camera and scanner setups

Industrial Camera Link

The Aomoproing USB 3.0 to Micro B cable connects industrial cameras, high-speed scanners and data acquisition devices to host equipment with a 30cm length. Its dual M2 screw locking design prevents accidental disconnection during vibration or movement in harsh environments. The cable is built for continuous operation in factory and laboratory settings where standard connectors would loosen.

Upgrade From Unsecured Leads

It replaces standard USB 3.0 cables that rely on friction fit alone and can detach under mechanical stress. The jump is worth it when equipment runs on moving stages, robotic arms or conveyor lines where any cable drop corrupts a capture session. Buyers who need a longer reach for fixed installations should note the fixed 30cm length.

USB 3.0 Signal Limits

The cable supports 4.8Gbps maximum throughput with USB 3.0 hosts and devices, falling back to 480Mbps on USB 2.0 or 1.1 ports. Double shielding with aluminum foil and braid plus 9-core construction resists electromagnetic interference in electrically noisy plants. Signal integrity beyond the 30cm length is not addressed by this assembly.

Highlights

  • Dual screw locking prevents disconnection in harsh industrial environments
  • USB-IF certified 3.0 standard delivers 5Gbps SuperSpeed data transfer
  • 9-core wire with double shielding blocks electromagnetic interference effectively
  • 24AWG power plus 28AWG signal cores ensure stable power and data
  • 30cm length suits compact industrial camera and scanner setups

Specifications

Cable Length11.81 in. (30cm)

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

What size are the panel screws on the Micro B connector?

The Micro B end uses two M2 mount panel screws to lock the cable firmly to the device interface.

Which driver or firmware step is required before first use?

No driver or firmware installation is required; the cable is plug-and-play with USB 3.0, 2.0 and 1.1 hosts.

What part of the cable is most likely to wear out in a high-vibration machine vision rig?

The M2 locking screws and the 9-core shielded wire assembly endure the most mechanical stress over time.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.