We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black sleeved SATA 15-pin to dual 3-pin 4-pin fan splitter cable 10 inch

Aomoproing

Aomoproing SATA 15-pin to 3x TX3 / TX4 PWM fan sleeved power splitter cable 10 inch black

SKU CH-VCQ5-ZJQCA

SATA-powered splitter runs two 3-pin or 4-pin fans from one PSU connector with 10-inch sleeved cables

Style PWM 1x3

  • Powers three fans from one SATA connector
  • 10-inch sleeved cable keeps builds tidy
  • 22 AWG copper cores deliver reliable 12 V power
  • 15-pin SATA plug fits standard PSU cables
  • Two-pin energised design runs fans at full speed

Power delivery via SATA

This cable draws 12 V directly from a power-supply SATA connector and splits it to two female fan headers. Only two pins on each header are energised, so the fans receive constant voltage without PWM speed control or tachometer feedback. It is intended for builders who want a simple always-on cooling addition.

Header compatibility check

Verify that your case fans use standard 3-pin or 4-pin connectors and that you are prepared for them to run at full speed continuously. The cable cannot regulate fan speed, so it is unsuitable for systems that rely on motherboard or controller-based PWM curves.

Sleeved 10-inch extension

The black sleeved jacket protects the 22 AWG copper wires and keeps the 10-inch run tidy inside the chassis. No software or additional adapters are included; the cable simply extends the reach of the PSU SATA power port to the fan locations.

Highlights

  • Powers three fans from one SATA connector
  • 10-inch sleeved cable keeps builds tidy
  • 22 AWG copper cores deliver reliable 12 V power
  • 15-pin SATA plug fits standard PSU cables
  • Two-pin energised design runs fans at full speed

Specifications

No published specifications for this item yet.

Other versions of this model

3 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Does the cable come with the three PWM fans or do I need to buy them separately?

Only the splitter cable is included; the three TX3 / TX4 PWM fans must be purchased separately.

The title mentions three fan headers but the specifications list two — which version is correct?

The cable provides two fan female connectors, not three, so you can attach up to two 3-pin or 4-pin fans.

Since only two pins are energised on each fan header, will the motherboard still report fan speeds?

No — with only power and ground active, the PWM control and tachometer lines are not connected, so speed reporting and throttle control are unavailable.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.