We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black DisplayPort fiber optic cable 100FT with aluminium connectors

Aomoproing

Aomoproing DisplayPort 1.4 fiber optic cable 100FT 30M 8K 60Hz 4K 144Hz 32.4Gbps

SKU CH-WXRY-5G13A

Transmits 8K at 60 Hz or 4K at 144 Hz over 100 ft with 32.4 Gbps bandwidth

Cable Length 100 Feet

  • Supports 8K at 60Hz and 4K at 144Hz for ultra-high resolution
  • 4Gbps bandwidth with HBR3 and DSC 1.2 enables lossless high-speed transmission
  • 100FT fiber optic design is thinner and lighter than copper for flexible routing
  • Aluminium alloy shell and anti-bend construction extend durability in tight spaces
  • Compatible with graphics cards, projectors and monitors for wide device support

Aomoproing 100FT DisplayPort 1.4 fiber cable

This 100FT fiber optic cable carries DisplayPort 1.4 signals up to 32.4Gbps bandwidth. It supports 8K at 60Hz and 4K at 144Hz for high-resolution gaming or professional displays. The link is backward compatible with 1080P and 2K resolutions. It suits users who need long-distance video without signal loss.

Upgrades copper cables beyond 10 metres

Copper DisplayPort cables typically degrade past 10 metres, causing flicker or bandwidth drops at 8K or high refresh rates. This fiber link removes that distance limit while keeping full 32.4Gbps throughput. The jump is worth it when the source and display are separated by walls, conduit runs or ceiling cavities. Buyers who only need a short desk connection gain no benefit from the added cost.

Plug directional ends and route gently

Each connector is marked for source or display; reversing them breaks the link. The slim fiber body bends easily through tight holes but must not be kinked or crushed during pulls. Dust caps should stay on until final insertion to protect the optical tips. No external power or driver install is required for standard DP 1.4 devices.

Highlights

  • Supports 8K at 60Hz and 4K at 144Hz for ultra-high resolution
  • 4Gbps bandwidth with HBR3 and DSC 1.2 enables lossless high-speed transmission
  • 100FT fiber optic design is thinner and lighter than copper for flexible routing
  • Aluminium alloy shell and anti-bend construction extend durability in tight spaces
  • Compatible with graphics cards, projectors and monitors for wide device support

Specifications

No published specifications for this item yet.

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Does the 100FT fiber cable need external power or a specific DisplayPort 1.4 port to run 8K@60Hz?

The cable draws power from the DisplayPort 1.4 source port; no external adapter is required. Ensure the GPU or laptop port is DP 1.4 with HBR3 and DSC 1.2 support for full 32.4Gbps bandwidth at 8K 60Hz.

The connectors are directional — which end plugs into the graphics card and which into the monitor?

One connector is marked Source and the other Display. Insert the Source end into the graphics card or laptop and the Display end into the monitor or projector; reversing them will break the optical link.

How should I clean or protect the fiber ends if I need to reroute the 30M cable later?

Keep the protective caps on whenever the cable is unplugged. If the tips get dusty, use a dry optical-grade lint-free swab — no liquids — and avoid sharp bends tighter than the cable's natural curve.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.