We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black nylon-braided DisplayPort cable with gold connectors, ten feet long

Aomoproing

Aomoproing DisplayPort 1.4 cable 10 ft 8K 60 Hz 4K 144 Hz HDR

SKU CH-4JJR-CKEZ2

A 10 ft DisplayPort 1.4 cable delivers 8K at 60 Hz, 4K at 144 Hz and HDR with 32.4 Gbps bandwidth, gold-plated connectors and nylon braiding

  • Drives 8K at 60 Hz with 32.4 Gbps HBR3 bandwidth
  • Handles 4K 144 Hz and 2K 240 Hz for smooth gaming
  • Gold-plated connectors and nylon braid resist wear and heat
  • Supports FreeSync and G-SYNC variable refresh for tear-free play
  • Carries HDR, DSC 1.2 and 32 audio channels over 10 ft

What this cable is and who needs it

This DisplayPort 1.4 cable links a graphics card or laptop to a monitor over 10 ft. It handles 8K at 60 Hz, 4K at 144 Hz and 2K at 240 Hz with HDR, HDCP 2.2 and DSC 1.2. The 32.4 Gbit/s HBR3 bandwidth suits high-refresh gaming panels and future 8K displays. Buyers who need longer runs or fibre-optic extension should look elsewhere.

Installation and common pitfalls

Plug the gold-plated connectors into matching DisplayPort sockets; the nylon braid resists kinking during routing. Ensure the source and display both run DisplayPort 1.4 firmware to unlock 8K 60 Hz or 4K 144 Hz modes. A frequent issue is leaving DSC disabled in the driver, which caps the link at lower refresh rates. Secure the latches to prevent signal drop-outs from vibration.

The spec that decides fit

The single deciding figure is the 32.4 Gbit/s HBR3 rating. If your monitor and GPU combine for a higher uncompressed data rate — such as 4K 240 Hz without DSC — this cable cannot carry the stream. Match the required bandwidth to 32.4 Gbit/s or enable DSC 1.2 in the driver to stay within the limit.

Highlights

  • Drives 8K at 60 Hz with 32.4 Gbps HBR3 bandwidth
  • Handles 4K 144 Hz and 2K 240 Hz for smooth gaming
  • Gold-plated connectors and nylon braid resist wear and heat
  • Supports FreeSync and G-SYNC variable refresh for tear-free play
  • Carries HDR, DSC 1.2 and 32 audio channels over 10 ft

Specifications

No published specifications for this item yet.

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

How do I verify the cable is delivering 8K at 60 Hz after connecting it?

Check your GPU control panel or monitor OSD to confirm the active link shows 7680 x 4320 at 60 Hz with HDR enabled and HDCP 2.2 active.

What comes in the box and do I need any extra adapters?

The box contains the 10 ft DisplayPort 1.4 cable with 24K gold-plated connectors and nylon braiding; no separate adapters are required for standard DisplayPort ports.

Which resolution and refresh rate combination should I select for my RTX 3080 setup?

Choose 4K at 144 Hz or 2K at 240 Hz to match the card's output and the cable's 32.4 Gbps HBR3 bandwidth limit.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.