Aomoproing
Aomoproing 8K DP 2.1 cable 6.6 ft
DisplayPort 2.1 cable delivers 40 Gbps bandwidth for 8K at 60 Hz or 4K at 120 Hz and is 6.6 feet long
- 8K at 60 Hz for ultra-sharp visuals
- 4K at 120 Hz enables smooth high-refresh gaming
- 40 Gbps bandwidth carries uncompressed HDR and audio
- Pure copper conductors ensure reliable signal over 6.6 ft
- Backwards compatible with DP 1.4, 1.3, 1.2, 1.1
8K DisplayPort 2.1 cable for high-refresh monitors
This 6.6 ft DisplayPort 2.1 cable delivers 40 Gbps bandwidth using HBR10. It supports 8K at 60 Hz, 4K at 120 Hz or 144 Hz and 2K at up to 240 Hz. The pure copper construction ensures reliable signal integrity for demanding graphics cards and monitors.
Replaces older DisplayPort cables limiting bandwidth
Upgrade from any cable rated for DisplayPort 1.4 or earlier when your monitor and GPU support 8K or high refresh rates at 4K. The jump is worth it if you own a 49-inch Odyssey G9 or similar display that requires HBR10 and DSC 1.2a for full resolution and refresh performance.
Fits between GPU and monitor with backward
The cable connects directly from a DisplayPort source to a DisplayPort sink using standard DP connectors. It works with DP, DP++ and DisplayPort++ ports and remains compatible with DisplayPort 2.0, 1.4, 1.3, 1.2, 1.2a and 1.1 devices. No external power or adapters are required for operation.
Highlights
- 8K at 60 Hz for ultra-sharp visuals
- 4K at 120 Hz enables smooth high-refresh gaming
- 40 Gbps bandwidth carries uncompressed HDR and audio
- Pure copper conductors ensure reliable signal over 6.6 ft
- Backwards compatible with DP 1.4, 1.3, 1.2, 1.1
Specifications
No published specifications for this item yet.
Other versions of this model
5 more in the same range
Same family, different memory, cooler or clock — compare before you commit.
Aomoproing DisplayPort 2.1 cable 6.6ft 8K 60Hz 4K 144Hz 40Gbps VESA Certified
Questions about this item
Will the 6.6 ft length reach my monitor if the PC is on the floor?
The cable is 6.6 ft long, which typically covers a floor-standing tower to a desk-mounted display with slack for routing.
Do I need to lock the connector in place or just push it in?
Push each DisplayPort plug straight in until the latch clicks; the common mistake is angling the connector, which bends pins and prevents a secure lock.
How often should I replace this cable to keep 8K 60 Hz performance?
Replace only if the latch breaks, pins bend, or you see signal drop-outs; the pure-copper construction and HBR10 rating do not degrade with age under normal use.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.








