We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two 1 kg spools of matte grey PLA filament on reusable reels

ANYCUBIC PLA Filament 1.75mm 2×1kg Texture Grey

SKU CH-P3HR-N8PCG

Two 1 kg spools of 1.75 mm PLA filament with ±0.02 mm tolerance, vacuum-sealed after 24-hour drying for clog-free printing

  • Color2*1kg Pla Texture Grey
  • MaterialPolylactic Acid
  • Diameter1.75
  • Weight1 kilograms
  • Precise extrusion with ±0.02 mm dimensional accuracy
  • Tangle-free spooling prevents jams and under-extrusion
  • 24-hour pre-drying and vacuum sealing ensure moisture-free printing
  • Low shrinkage delivers strong layer adhesion and clean bridging
  • Reusable 1 kg spools (2.2 lbs each) for convenient storage

Two spools of PLA for FDM printing

This bundle supplies two 1 kg spools of 1.75 mm polylactic acid filament in a texture grey finish. The material is dried for 24 hours before vacuum sealing with desiccant to keep moisture low. Dimensional tolerance is held to ± 0.02 mm for consistent extrusion.

Makers who want reliable daily filament

Suited to hobbyists and small workshops running standard 1.75 mm FDM printers that need low warp and minimal stringing. Not suited to users whose machines require a different filament diameter or who need engineering-grade mechanical properties.

Diameter tolerance of ± 0.02 mm

The tight tolerance keeps flow steady across long prints and reduces the risk of nozzle clogging. If your slicer or printer cannot handle 1.75 mm stock this bundle will not work.

Highlights

  • Precise extrusion with ±0.02 mm dimensional accuracy
  • Tangle-free spooling prevents jams and under-extrusion
  • 24-hour pre-drying and vacuum sealing ensure moisture-free printing
  • Low shrinkage delivers strong layer adhesion and clean bridging
  • Reusable 1 kg spools (2.2 lbs each) for convenient storage

Specifications

BrandANYCUBIC
Color2*1kg Pla Texture Grey
MaterialPolylactic Acid
Diameter1.75
Weight1 kilograms

Questions about this item

How long can the filament stay on the printer before moisture affects print quality?

Each spool is dried for 24 hours before vacuum sealing with desiccant, so it prints reliably straight from the bag; reseal after opening to maintain low moisture.

What temperature rise should I expect in the hot-end during an all-day Texture Grey print?

PLA extrudes at typical PLA temperatures, so the hot-end runs at normal PLA heat levels without extra thermal load from this material.

Which spool dimensions must my printer’s holder accommodate for these 1 kg reels?

Each spool weighs 1 kg (2.2 lbs) and uses a larger inner-diameter core designed for smoother feeding; check that your holder accepts that core size.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.