We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two small black and silver boxes with Micro USB cables and Ethernet ports

ANVISION AV-PS05 USB-G-2 2-Pack Gigabit PoE Splitter 48V to 5V 2.4A Micro USB

SKU CH-BXTF-3CZDW

Two-port 5 V 2.4 A PoE splitters convert 44–56 V input into Micro USB power and gigabit Ethernet for Raspberry Pi or IP cameras

  • Powerline Speeds1000 megabits_per_second
  • Connection TypeUSB
  • Connection Speeds1000 megabits_per_second
  • Power Supply48 volts
  • Dimensions2.69 in x 1.96 in x 1.36 in
  • Weight0.12 kilograms
  • Delivers 5 V 2.4 A power from PoE
  • Gigabit Ethernet data up to 1000 Mbps
  • IEEE 802.3af compliant for broad switch compatibility
  • Works up to 100 m or 328 feet from source
  • Ready to use with no configuration needed

Purpose and Compatibility

This two-pack of ANVISION AV-PS05 USB-G-2 splitters separates a PoE signal into 5V DC power and Gigabit Ethernet data. Each unit delivers up to 2.4A at 12W maximum through a Micro USB connector. The adapters comply with IEEE 802.3af and accept 44-56V DC input from a PoE switch or injector. They support Raspberry Pi 3B+, IP cameras, tablets and other 5V Micro USB devices.

Sustained Operation

The splitters maintain 10/100/1000Mbps Ethernet data rates over cable runs up to 100m (328 feet) without configuration. Power output remains at 5V DC 2.4A continuously while the PoE source supplies 48V nominal input. Plug-and-play operation requires no software setup, allowing immediate deployment for devices lacking local power outlets. The 18.5cm Micro USB cable connects directly to compatible equipment.

Thermals, Noise and Power

Passive operation produces no fan noise and draws power solely from the PoE infrastructure. The units operate reliably across an ambient temperature range of -10 to 45 degrees Celsius. Compact dimensions of 2.69 x 1.96 x 1.36 inches and a weight of 0.12 kilograms allow discreet placement near the powered device. No external power supply is needed at the installation point.

Highlights

  • Delivers 5 V 2.4 A power from PoE
  • Gigabit Ethernet data up to 1000 Mbps
  • IEEE 802.3af compliant for broad switch compatibility
  • Works up to 100 m or 328 feet from source
  • Ready to use with no configuration needed

Specifications

BrandANVISION
ModelAV-PS05 USB-G-2
Powerline Speeds1000 megabits_per_second
Connection TypeUSB
Connection Speeds1000 megabits_per_second
Power Supply48 volts
Dimensions2.69 in x 1.96 in x 1.36 in
Weight0.12 kilograms

Questions about this item

How much heat does the AV-PS05 USB-G-2 generate when running continuously at 12 watts?

The splitter operates from -10 to 45 °C ambient temperature and has no moving parts, so it stays cool under full 12 W load.

What must I already own to use this PoE splitter with a Raspberry Pi?

You need a PoE switch or injector supplying 44–56 V DC, a Cat5e or better Ethernet cable up to 100 m, and a Pi with a Micro USB power port.

Will the gigabit port on the AV-PS05 USB-G-2 work with my older 10/100 Mbps IP camera?

Yes, the 10/100/1000 Mbps Ethernet port auto-negotiates down to 10 or 100 Mbps for full compatibility.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.