We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four small black and silver PoE splitters with micro USB cables and RJ45 connectors

ANVISION AV-PS05 USB-4 4-pack PoE splitter 5V 2.4A 100Mbps

SKU CH-RXZZ-J34NA

Four IEEE 802.3af compliant splitters convert 44-56 V PoE into 5 V 2.4 A micro-USB power plus 100 Mbps Ethernet for non-PoE devices

  • Powerline Speeds100 megabits_per_second
  • Connection Speeds100 megabits_per_second
  • Power Supply48 volts
  • Weight0.16 kilograms
  • IEEE 802.3af compliant for safe power delivery
  • 5V 2.4A output powers Raspberry Pi and IP cameras
  • 100Mbps data rate keeps network traffic flowing
  • 5cm Micro USB cable reaches nearby devices
  • Four splitters in one pack cover multiple endpoints

4-Pack PoE Splitter for 5V Devices

This four-pack supplies 5V DC power and 10/100Mbps ethernet from a single PoE feed. Each unit complies with IEEE 802.3af and delivers up to 2.4A at 5V through a Micro USB connector. The splitters are suited for tablets, IP cameras, Raspberry Pi boards and similar non-PoE gear.

Replaces Separate Power Injectors

Instead of running individual AC adapters to each endpoint, these splitters draw 44-56V DC from a PoE switch over standard ethernet cable. The upgrade is worthwhile when devices are far from mains sockets or when a tidy, single-cable install is preferred. They do not serve equipment that requires higher voltages or gigabit data rates.

Handles 5V Loads Up to 12W

Each splitter comfortably powers devices drawing up to 12W at 5V within an ambient range of -10 to 45 degrees Celsius. The 100Mbps data path is adequate for typical IP camera streams and basic networking tasks. Headroom runs out for gear needing more than 2.4A, voltages above 5V or network speeds beyond 100 megabits per second.

Highlights

  • IEEE 802.3af compliant for safe power delivery
  • 5V 2.4A output powers Raspberry Pi and IP cameras
  • 100Mbps data rate keeps network traffic flowing
  • 5cm Micro USB cable reaches nearby devices
  • Four splitters in one pack cover multiple endpoints

Specifications

BrandANVISION
ModelAV-PS05 USB-4
Powerline Speeds100 megabits_per_second
Connection Speeds100 megabits_per_second
Power Supply48 volts
Weight0.16 kilograms

Questions about this item

What cable length and connector does the micro-USB output use?

Each splitter includes an 18.5 cm micro-USB cable terminated with a micro-USB plug for the device side.

Which connectors must be plugged in and in what order for the splitter to negotiate power?

Connect the PoE switch to the shielded RJ-45 female input first, then attach the RJ-45 male output to the device and the micro-USB plug for power; the IEEE 802.3af handshake occurs on the input port.

What temperature range should the installation site stay within for reliable long-term operation?

The splitter is rated for -10 °C to 45 °C ambient; keep the mounting location inside this range to avoid thermal stress on the 12 W output stage.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.