We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two black and silver PoE splitters with micro USB cables and RJ45 connectors

ANVISION AV-PS05-1 2-Pack PoE Splitter 48V to 5V 2.4A Micro USB Powerline Networking

SKU CH-67R2-R2M99

Converts 48 V PoE into 5 V 2.4 A micro USB power plus 100 Mbps ethernet for non-PoE devices up to 328 feet

  • Interfaceethernet
  • Powerline Speeds100 megabits_per_second
  • Connection TypeUSB
  • Connection Speeds100 megabits_per_second
  • Weight0.12 kilograms
  • Converts 48V PoE to 5V 2.4A micro USB power
  • Delivers 100Mbps ethernet data alongside power over one cable
  • Works up to 328 feet from PoE switch or injector
  • Plug-and-play with no configuration required for IP cameras or Raspberry Pi
  • Two splitters included, each weighing 0.12 kg

48V to 5V PoE Splitter 2-Pack

This two-pack provides 48V to 5V PoE splitters that convert IEEE 802.3af input into 5V DC power and 10/100Mbps ethernet data. Each unit delivers up to 2.4A at 12W through a micro USB connector. The splitters enable non-PoE devices to receive power and data over a single ethernet cable run up to 100 metres.

Suits IP cameras, tablets.

Ideal for deploying non-PoE network devices where no mains outlet exists, provided they accept 5V micro USB power and 10/100Mbps ethernet. Not suitable for gigabit-only hardware such as Raspberry Pi 3B+ or any device requiring 802.3at/bt power levels or a different DC connector.

12W output handles typical IP cameras

The 5V 2.4A supply comfortably powers most 5V micro USB cameras, tablets and Pi boards within the 100Mbps data budget. Headroom disappears with higher-draw peripherals or multi-device hubs, and the 10/100Mbps link caps throughput well below gigabit speeds.

Highlights

  • Converts 48V PoE to 5V 2.4A micro USB power
  • Delivers 100Mbps ethernet data alongside power over one cable
  • Works up to 328 feet from PoE switch or injector
  • Plug-and-play with no configuration required for IP cameras or Raspberry Pi
  • Two splitters included, each weighing 0.12 kg

Specifications

BrandANVISION
ModelAV-PS05-1
Interfaceethernet
Powerline Speeds100 megabits_per_second
Connection TypeUSB
Connection Speeds100 megabits_per_second
Weight0.12 kilograms

Questions about this item

What PoE source is needed to power the AV-PS05-1 splitter?

The splitter requires an IEEE 802.3af compliant PoE switch or injector delivering 44 to 56 V DC over a shielded RJ-45 connection.

Can I use this splitter with a Raspberry Pi 3B+ that has a gigabit Ethernet port?

No, the splitter only supports 10/100 Mbps non-PoE devices and explicitly does not support gigabit models such as the Raspberry Pi 3B+.

How can I verify the splitter is delivering the correct 5 V output after installation?

Measure the micro USB plug with a multimeter; it should read 5 V DC at up to 2.4 A (12 W maximum) when the PoE source is active.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.