We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Steel pipe nipple, 1/2 inch NPT, 6 inch length, black anodized finish

Anvil

Anvil Pipe Nipple Steel 1/2" NPT 6" Transparent

SKU CH-5MN2-66TGM

A 6-inch steel pipe nipple with 1/2-inch NPT threads for air, gases, non-potable water and oils

  • ColorTransparent
  • Handles 2,000 psi for demanding air and gas lines
  • Withstands 300 psi steam at 550°F for high-heat applications
  • Seamless steel construction prevents leaks under pressure
  • 1/2" NPT threads fit standard plumbing connections
  • Made in USA for reliable quality control

Pipe Nipple for Air, Gases, Oils

This BECK pipe nipple is made from seamless steel with a black anodised finish. It suits applications carrying air, gases, non-potable water and oils. The 1/2 inch nominal size and 6 inch overall length fit standard NPT threading requirements. Rated for 2,000 psi at 150 degrees F and 300 psi steam at 550 degrees F.

Simple NPT Threaded Installation

The nipple uses standard NPT threads on both ends for direct connection to compatible fittings. Apply suitable thread sealant or tape to prevent leaks on the tapered threads. Over-tightening can crack the fitting or strip the threads, so tighten to the correct torque. Ensure the black anodised coating remains intact to maintain corrosion resistance.

Check Pressure, Media and Thread Compatibility

Verify your system pressure stays below the 2,000 psi rating at operating temperature. Confirm the conveyed media is compatible with steel and the anodised finish. Ensure mating components use 1/2 inch NPT threads with matching taper. This item is restricted from sale in certain states, so check local regulations before ordering.

Highlights

  • Handles 2,000 psi for demanding air and gas lines
  • Withstands 300 psi steam at 550°F for high-heat applications
  • Seamless steel construction prevents leaks under pressure
  • 1/2" NPT threads fit standard plumbing connections
  • Made in USA for reliable quality control

Specifications

ColorTransparent
BrandBECK

Questions about this item

How can I confirm the pipe nipple is sealing correctly after installation?

Pressurise the line up to 2,000 psi at 150 °F or 300 psi steam at 550 °F and check for leaks at the NPT threads; the seamless steel construction and black anodized finish are rated for those limits.

What comes in the box and what must I supply?

The package contains the 6 in steel nipple with 1/2 in NPT threads on both ends; you will need compatible NPT fittings, thread sealant or tape, and any mounting hardware for your air, gas, oil or non-potable water system.

Which length or size variant should I select for a 1/2 in nominal pipe system?

This model is the 6 in overall length version with 1/2 in nominal size, 53/64 in outside diameter and 2,000 psi pressure rating; choose it when those exact dimensions match your piping layout.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.