We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black forged steel 90 degree elbow fitting with threaded ends

Anvil

Anvil 361101405 1-1/4" Black Forged Steel 90° Elbow

SKU CH-JHRY-M02QW

A 90-degree black forged steel elbow with FNPT connections rated for 1500 psi at 150 degrees Fahrenheit

  • Directs flow at a right angle for efficient piping layouts
  • Forged steel construction handles up to 1500 psi at 150 °F
  • Rated for 300 psi saturated steam at 550 °F
  • Meets ASME B16.11 and ASTM A106 standards for reliable performance
  • Female NPT threads provide secure, leak-resistant connections

1-1/4" Black Forged Steel 90° Elbow

This Anvil fitting redirects pipe runs by 90 degrees in high-pressure steam or water systems. The Class 3000 forged steel body meets ASME B 16.11 and ASTM A106 for demanding industrial plumbing. It accepts 1-1/4 inch FNPT threads on both ends. The unit is rated for 1500 psi at 150 °F and 300 psi saturated steam at 550 °F.

Threaded FNPT Connections

Female National Pipe Taper threads on each port allow direct assembly to male-threaded pipe without welding or flanges. The two-hole design simplifies alignment during installation. Forged construction resists cracking under thermal cycling from -20 °F to 550 °F. No gaskets, sealants or additional hardware are included in the package.

1500 psi Pressure Rating at 150 °F

This maximum working pressure determines whether the elbow suits the intended service. Systems operating above 1500 psi at 150 °F require a higher-class fitting. The 300 psi saturated steam limit at 550 °F is the governing figure for steam lines. Builders needing larger diameters or socket-weld ends must select a different fitting.

Highlights

  • Directs flow at a right angle for efficient piping layouts
  • Forged steel construction handles up to 1500 psi at 150 °F
  • Rated for 300 psi saturated steam at 550 °F
  • Meets ASME B16.11 and ASTM A106 standards for reliable performance
  • Female NPT threads provide secure, leak-resistant connections

Specifications

BrandANVIL

Questions about this item

Will the forged steel elbow need re-threading or replacement after repeated assembly cycles?

The FNPT threads conform to ASME B 16.11 and B 1.20.1; inspect threads for galling after each disassembly and replace the fitting if thread damage appears.

What pressure or temperature limit will be reached first during continuous steam service?

Saturated steam rating is 300 psi at 550 °F; the temperature ceiling of 550 °F is the first hard limit under sustained steam use.

How hot does the fitting surface get when carrying 150 °F fluid all day?

The fitting will stabilise near the fluid temperature of 150 °F, well within the -20 °F to 550 °F operating range.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.