We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Galvanized malleable iron reducer coupling with female NPT threads

Anvil

Anvil 311087605 1-1/4" x 1" FNPT Galvanized Reducer Coupling

SKU CH-A535-KNVS4

Connects 1-1/4" and 1" female NPT pipes using galvanized malleable iron rated for 300 psi at 150 °F

  • Galvanised malleable iron resists corrosion in water lines
  • Class 150 rating handles 300 psi at 150 °F
  • Schedule 40 compatibility fits standard piping systems
  • Female NPT threads on both ends simplify installation

Anvil 1-1/4" x 1" Galvanized Reducer

This Anvil reducing coupling connects a 1-1/4 inch female NPT pipe to a 1 inch female NPT pipe. It is made from malleable iron with a galvanized finish for corrosion resistance. The fitting is rated for Class 150 service and Schedule 40 pipe. It handles a maximum operating pressure of 300 psi at 150 degrees Fahrenheit.

Replaces mismatched pipe sizes in water or air lines

Use this coupling when joining two threaded pipes of different diameters in a straight run. The jump is worth it when a system requires a secure, pressure-rated transition without welding or adapters. It is not suited for installations needing a male-threaded end, a different pressure class, or a non-galvanized material such as black iron or brass.

Highlights

  • Galvanised malleable iron resists corrosion in water lines
  • Class 150 rating handles 300 psi at 150 °F
  • Schedule 40 compatibility fits standard piping systems
  • Female NPT threads on both ends simplify installation

Specifications

BrandANVIL

Questions about this item

What pipe schedule does the 1-1/4" x 1" galvanized reducer coupling accept?

The coupling is rated for Schedule 40 pipe on both the 1-1/4 inch and 1 inch female NPT ends.

How do you seal the NPT threads on this malleable iron fitting, and what step is often missed?

Apply PTFE tape or pipe dope to the male threads only, then tighten until snug; the common error is over-tightening, which can crack the Class 150 casting.

More in Fittings & Couplings

Similar items

Same shelf, same checkout — eight coins and a 30-minute rate lock.