We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Galvanized malleable iron 45 degree street elbow, 2 inch FNPT x MNPT

Anvil

Anvil 311028203 2" FNPT x MNPT Galvanized 45° Street Elbow coupling

SKU CH-MMVF-4ZGHA

Galvanised malleable-iron 45° street elbow joins 2" FNPT to MNPT at Class 150 for Schedule 40 pipe, rated 300 psi at 150 °F

  • 45° street elbow redirects flow in tight spaces
  • Galvanised malleable iron resists corrosion on water lines
  • Class 150 rating handles 300 psi at 150 °F
  • Female NPT to male NPT connects pipe without extra fittings
  • Schedule 40 compatibility fits standard 2-inch piping systems

Anvil 2" Galvanized 45° Street Elbow

This new Anvil fitting is a 2-inch Class 150 street elbow made from galvanized malleable iron. It connects a 2-inch female NPT thread to a 2-inch male NPT thread at a 45-degree angle. The fitting is rated for 300 psi at 150 degrees F and suits Schedule 40 pipe.

For pipe runs needing a 45-degree directional change

Plumbers and maintenance crews joining two-inch NPT threads at this angle will find the part matches the specification. Installers needing a different bend angle, a different thread type, or a pressure class above Class 150 should select another fitting.

Class 150 pressure rating at 300 psi

The maximum operating pressure of 300 psi at 150 degrees F is the critical figure that determines whether this elbow meets the system design requirements. Verify the service conditions against this rating before installation.

Highlights

  • 45° street elbow redirects flow in tight spaces
  • Galvanised malleable iron resists corrosion on water lines
  • Class 150 rating handles 300 psi at 150 °F
  • Female NPT to male NPT connects pipe without extra fittings
  • Schedule 40 compatibility fits standard 2-inch piping systems

Specifications

BrandANVIL

Questions about this item

Will the galvanized coating on this Class 150 elbow need replacement over time?

The galvanized malleable iron resists corrosion in typical water and air lines; replacement is only needed if the coating is mechanically damaged or the system chemistry becomes unusually aggressive.

What pressure limit applies when this 45° street elbow runs continuously at elevated temperature?

The fitting is rated for 300 psi maximum operating pressure at 150 °F, so sustained pressure above that value is the first limit reached under continuous use.

Does this 2-inch NPT elbow generate noticeable heat or noise when fluid flows all day?

As a passive galvanized malleable-iron fitting it produces no noise or heat of its own; any temperature rise or sound comes from the fluid and pump, not the elbow.

More in Fittings & Couplings

Similar items

Same shelf, same checkout — eight coins and a 30-minute rate lock.