We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Galvanised malleable iron split-ring pipe hanger, 3/8 inch rod size

Anvil

Anvil 0560500183 Split Ring Hanger Trap

SKU CH-YKCJ-8A80B MPN 0560500183

Malleable iron split-ring hanger suspends 3/8-inch non-insulated stationary pipe with a 180 lb load rating and meets A-A-1192A, WW-H-171-E, ANSI/MSS SP-69 and MSS SP-58 standards

  • TypeDrain Components
  • Malleable iron construction delivers 180 lb load capacity
  • Galvanised finish resists corrosion on stationary pipe runs
  • Split-ring design allows quick 3/8 in rod attachment
  • Meets A-A-1192A Type 12 and WW-H-171-E Type 25 standards
  • Conforms to ANSI/MSS SP-69 and MSS SP-58 Type 12

Malleable Iron Split Ring Hanger

This Anvil 0560500183 split ring hanger suspends non-insulated stationary pipe lines. It is constructed from galvanized malleable iron for corrosion resistance. The hanger accommodates a 3/8 inch pipe size and a 3/8 inch rod size. It supports a maximum load of 180 Lb.

Installers needing standard pipe suspension

This hanger suits plumbing and mechanical contractors hanging 3/8 inch pipe from threaded rod. It meets A-A-1192A Type 12, WW-H-171-E Type 25, ANSI/MSS SP-69, and MSS SP-58 Type 12 standards. It is not for insulated pipe lines or dynamic load applications. Buyers needing different pipe or rod diameters must select another size.

180 Lb maximum load rating

The 180 Lb maximum load determines if this hanger can safely support the specific pipe system. Verify the total weight of the pipe, contents, and spacing against this limit. Exceeding this rating risks structural failure. This single figure decides suitability for the installation.

Highlights

  • Malleable iron construction delivers 180 lb load capacity
  • Galvanised finish resists corrosion on stationary pipe runs
  • Split-ring design allows quick 3/8 in rod attachment
  • Meets A-A-1192A Type 12 and WW-H-171-E Type 25 standards
  • Conforms to ANSI/MSS SP-69 and MSS SP-58 Type 12

Specifications

TypeDrain Components
BrandAnvil
Model0560500183

Questions about this item

What comes in the box with the Anvil 0560500183 split ring hanger and do I need to buy the suspension rod separately?

The box contains the galvanized malleable iron split ring hanger sized for 3/8 inch pipe and 3/8 inch rod. The threaded rod itself is not included and must be purchased separately.

Which Anvil split ring hanger version should I choose for a 3/8 inch pipe line?

Model 0560500183 is the correct version; it is manufactured for 3/8 inch pipe size and 3/8 inch rod size, with a maximum load rating of 180 lb.

What does the 180 lb maximum load mean when the hanger is installed on a real pipe run?

It indicates the hanger can safely support up to 180 lb of stationary, non-insulated pipe weight when mounted with a 3/8 inch rod, meeting standards A-A-1192A Type 12, WW-H-171-E Type 25, ANSI/MSS SP-69 and MSS SP-58 Type 12.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.